Amazon Black Friday Week deals

Paid link

Storage · How-to guide

How to Attach a Hard Drive to a PC

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

To attach a hard drive to a PC, shut the PC down, mount the drive in an empty bay, and connect a SATA data cable and a SATA power cable. Then start the PC and set up the new drive in your operating system so it appears as storage you can use.

  1. Shut down and unplug the PC

    Shut the PC down and unplug it before you open the case. Follow the maker's manual for your PC case and motherboard while you work. If the PC is under warranty, do not open it and contact the maker instead. Keep the new drive in its packaging until you are ready to mount it.

  2. Check the bay and SATA ports

    Check that your case has an empty bay that fits the drive size and that your motherboard has a free SATA data port. Check that your power supply has a free SATA power connector. The drives in the gear list use a SATA 6 Gb/s interface, so match the drive to a SATA port on your board.

  3. Mount the drive in the bay

    Slide the drive into the empty bay and line up the mounting holes. Fasten it with the screws or rails your case uses, as shown in the case manual. The drive should sit flat and firm in the bay with the connectors facing the cables. Do not force the drive if the bay and drive size do not match.

  4. Connect data and power cables

    Connect one end of a SATA data cable to the drive and the other end to a SATA data port on the motherboard. Connect a SATA power connector from the power supply to the drive. Push each connector in until it seats, and keep cables clear of fans. Close the case before you plug the PC in again.

  5. Start the PC and set up the drive

    Plug the PC in and start it. Open your operating system disk tool and look for the new drive. Initialize and format the drive in the tool so the system can use it, and give it a drive letter if the tool asks. If the drive does not appear, shut down, unplug, and recheck the cables and ports.

What you need

Western Digital WD161KFGX

Western Digital WD161KFGX

A 16TB 3.5 inch SATA 6 Gb/s NAS drive with 512 MB cache and a 5-year manufacturer's limited warranty for internal storage.

View on Amazon
Seagate 8TB BarraCuda Internal Hard Drive

Seagate 8TB BarraCuda Internal Hard Drive

An 8TB SATA 6 Gb/s internal drive for desktop storage with a 2-year limited warranty in frustration free packaging.

View on Amazon
Seagate BarraCuda

Seagate BarraCuda

A 2TB 3.5 inch SATA 6 Gb/s drive with 7200 RPM, 256MB cache and DiscWizard cloning software for moving data.

View on Amazon
Western Digital WD120EAGZ

Western Digital WD120EAGZ

A 12TB 3.5 inch SATA 6 Gb/s drive with 512 MB cache and Acronis True Image WD Edition cloning software included.

View on Amazon

These come from our ranked list Best Internal Hard Drive, which compares them spec by spec.

FAQ

Can I attach a drive while the PC is on?

No. Shut the PC down and unplug it before you open the case or connect cables. Follow the maker's manual, and contact the maker if the PC is under warranty.

Do I need to format a new hard drive?

Initialize and format a new drive in your operating system disk tool before you can store files on it. The tool also lets you assign a drive letter for the drive.

What if the PC does not see the new drive?

Shut down and unplug the PC, then recheck that the SATA data cable and SATA power connector are seated. Confirm the bay size and SATA port match the drive, and check the motherboard manual.

Ranked internal hard drives guides