What You Need for Mesh WiFi
For mesh WiFi you need a mesh system with at least two units, plus a modem for most internet providers. The main unit plugs into the modem and takes the place of your router, while the extra units spread the signal through your home under one network name. A wired connection between units, called wired backhaul, gives a more stable link where you can run a cable.
A modem and an internet plan
Mesh WiFi needs an internet connection, and a modem is required for most internet providers. The mesh system replaces your router, so plug the main unit into the modem with an Ethernet cable. Check with your provider if you are not sure whether you need a separate modem.
Enough units for your home
Count the rooms and floors the signal must reach, then match them to the coverage figure of the pack you buy. The TP-Link Deco S4 3-pack covers up to 5,500 sq ft and the 2-pack covers up to 3,800 sq ft. The eero 7 2-pack covers up to 4,000 sq ft and the 3-pack covers up to 6,000 sq ft. Add a unit where the signal is weak rather than moving the main unit.
Place the units around your home
Put the main unit in the open near the center of your home, away from thick walls. Place each extra unit halfway between the main unit and the area it must cover, where it still gets a strong signal from the main unit. Avoid putting a unit in a closed cabinet or behind a television, since walls weaken the signal between units.
Set up the network and connect devices
Open the app for your system and follow its setup steps to name the network and set its password. The Deco app runs on Android and iOS devices, and it turns guest WiFi on and off with Alexa voice commands. Once the network is up, connect your phones, laptops and other devices to the single network name, and use an Ethernet port on a unit for any device that needs a wired link.
What you need

TP-Link Deco S4 Mesh AC1900
A three-unit Wi-Fi 5 mesh system that covers up to 5,500 sq ft with dual-band AC1900 speeds, 2 Gbps Ethernet ports on each unit, and parental controls.
View on Amazon
TP-Link Deco S4 Whole Home Mesh
A two-unit Wi-Fi 5 mesh system that covers up to 3,800 sq ft with dual-band AC1900 speeds, 2 Gbps Ethernet ports on each unit, and parental controls.
View on Amazon
Amazon eero 7 dual-band mesh
A two-unit Wi-Fi 7 mesh system covering up to 4,000 sq ft, with support for internet plans up to 2.5 Gbps, two auto-sensing 2.5 GbE ports and 120+ devices.
View on Amazon
Amazon eero 7 dual-band mesh
A three-unit Wi-Fi 7 mesh system covering up to 6,000 sq ft, with support for internet plans up to 2.5 Gbps, two auto-sensing 2.5 GbE ports and 120+ devices.
View on AmazonThese come from our ranked list Best Mesh Router, which compares them spec by spec.
FAQ
Do I still need a modem with mesh WiFi?
Yes, for most internet providers. The mesh system replaces your router, and the main unit plugs into the modem. Check with your provider if you are not sure what type of modem you have.
How many mesh units do I need?
It depends on the size of your home and how many floors it has. Start with the coverage figure for the pack you buy, then add a unit if a room still has a weak signal.
Can mesh WiFi replace my router and extender?
Yes. A mesh system replaces both: the main unit takes the place of your router, and the extra units spread the signal instead of a separate extender. Your devices stay on one network name as you move through your home.



