Amazon Black Friday Week deals

Paid link

Routers · How-to guide

Does a WiFi Extender Work?

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

Yes. A WiFi extender picks up the signal from your router and repeats it further into your home, so a phone or laptop in a far room connects to the extender instead of the weak router signal. The trade-off is speed: the repeated signal runs slower than a direct connection, and a mesh system or a wired access point often works better.

  1. How an extender repeats the signal

    An extender sits between your router and the dead spot, joins the router's WiFi network, and creates a second network with the same name or a new one. Your phone connects to whichever signal is stronger as you move through the house. Because the extender receives and then re-sends each packet on the same radio, the link to the far room runs at a lower speed than a direct link to the router.

  2. Where an extender helps

    An extender helps when one room sits just past the router's reach, such as a bedroom at the end of a hall or a home office upstairs. It works with the router you already own, and it needs a power outlet about halfway between the router and the dead spot. It helps less in a large or multi-story home, where the signal has to cross several walls and floors, and the NETGEAR Nighthawk R6700AX notes that larger or multi-story homes may benefit from a mesh WiFi system.

  3. Mesh systems instead of one extender

    A mesh system uses two or more units that talk to each other and hand your phone from one unit to the next as you move. The TP-Link Deco X55 covers up to 6500 square feet with its 3-pack and connects up to 150 devices, and the Amazon eero 6 covers up to 1,500 sq. ft. and connects 75+ devices. They keep one network name across the house.

  4. Place the extender halfway

    Put the extender where the router's signal is still strong, about halfway between the router and the dead spot, and plug it into a power outlet there. If the extender sits too far from the router, it repeats a weak signal and the far room stays slow. Move it closer to the router and check the signal again from the far room.

What you need

TP-Link Deco X55 AX3000

TP-Link Deco X55 AX3000

A WiFi 6 mesh system in a 3-pack that covers up to 6500 square feet, connects up to 150 devices, and has 3 Gigabit Ethernet ports per unit.

View on Amazon
Amazon eero 6 mesh

Amazon eero 6 mesh

A WiFi 6 mesh router that covers up to 1,500 sq. ft., supports speeds up to 900 Mbps, and connects 75+ devices.

View on Amazon
TP-Link AX1800 WiFi 6 Router

TP-Link AX1800 WiFi 6 Router

A WiFi 6 dual-band router with AX1800 speed class, 4 high-gain antennas, and Easy Mesh support.

View on Amazon
NETGEAR Nighthawk

NETGEAR Nighthawk

A WiFi 6 dual-band router with AX1800 speed class, 4 Gigabit LAN ports, and coverage up to 1,500 sq. ft. for up to 20 devices.

View on Amazon

These come from our ranked list Best Wi-Fi Router, which compares them spec by spec.

FAQ

Do I still need my router with an extender?

Yes. An extender repeats the signal from your router, so the router stays in place and the extender extends its reach. The TP-Link Deco X55 replaces a wireless router and extender with a mesh system, so it works as the router itself.

Will an extender slow down my WiFi?

The repeated signal runs slower than a direct connection to the router, because the extender receives and re-sends the signal. Place the extender where the router signal is still strong to keep the repeated link as fast as it can be.

Can I use a mesh system instead?

Yes. The TP-Link Deco X55 is a WiFi 6 mesh system that covers up to 6500 square feet, and the Amazon eero 6 is a mesh WiFi router that covers up to 1,500 sq. ft. Both connect many devices: up to 150 for the Deco X55 and 75+ for the eero 6.

Ranked routers guides