How to Connect a WiFi Extender
Plug the extender into a power outlet near your router, then open the maker's app or the setup page and join the extender to your router's Wi-Fi network. The extender then repeats the signal, so move it to a spot between the router and the weak-signal area and check that it shows a strong link to the router.
Plug the extender in
Plug the extender into a power outlet in the same room as the router for setup. Wait for its power light to come on and settle, then open the maker's app on your phone or the setup page the extender shows. The app or page walks you through the steps, so keep your router's Wi-Fi name and password ready.
Join the extender to your router
In the app or on the setup page, pick your router's Wi-Fi network from the list and enter its password. The extender then links to the router and repeats its signal. Some extenders keep the same network and some show a separate one for the extended signal, so check the app or the setup page for the network it shows and note it down.
Move it to its final spot
Once the extender links to the router, unplug it and move it to the outlet between the router and the weak-signal area. Plug it in and wait for it to reconnect, then check the signal light or the app for a strong link to the router. If the link is weak, move the extender closer to the router and check again.
Check the bands and the devices
Wi-Fi runs on the 2.4 GHz and 5 GHz bands, and the extender repeats the bands your router uses. Check in the app or on the setup page that the extender is linked on the band your devices use, and check a device in the weak-signal area to see that it holds the connection. If a device keeps dropping, move the extender closer to the router.
What you need

TP-Link Deco X55 AX3000
A Wi-Fi 6 mesh system in a 3-pack that covers up to 6500 sq ft and replaces a router and extender, with 3 Gigabit ports per unit.
View on Amazon
Amazon eero 6 mesh
A Wi-Fi 6 mesh router that covers up to 1,500 sq ft and supports internet plans up to 900 Mbps, set up through the eero app.
View on Amazon
TP-Link AX1800 WiFi 6 Router
A Wi-Fi 6 dual-band AX1800 router with Easy Mesh support and 4 high-gain antennas.
View on Amazon
NETGEAR Nighthawk
A Wi-Fi 6 dual-band AX1800 router that covers up to 1,500 sq ft for up to 20 devices, with 4 Gigabit ports and guided setup in the Nighthawk app.
View on AmazonThese come from our ranked list Best Wi-Fi Router, which compares them spec by spec.
FAQ
Where should I plug in a WiFi extender?
Between the router and the weak-signal area, close enough to the router for a strong link. If the link is weak, move the extender closer to the router and check again.
Does a WiFi extender use the same network name?
Some extenders keep the same network name and some show a separate name for the extended signal. Check the name in the app or on the setup page after setup.
Can I connect an extender to any router?
An extender joins the Wi-Fi network your router broadcasts, so have the network name and password ready. Check the extender's notes for the bands it repeats before you buy.
Do I need an app to set up an extender?
Many extenders set up through the maker's app, and some use a setup page in the browser instead. Follow the steps the extender shows, and keep the router's Wi-Fi password ready.




