Amazon Black Friday Week deals

Paid link

Routers · How-to guide

How Does a WiFi Router Work?

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

A WiFi router takes the internet signal from your modem and turns it into a wireless network your devices join. It sends and receives radio signals on the 2.4 GHz and 5 GHz bands, and it directs traffic so each device gets the data it asked for. A router also gives your home network 1 address on the internet while each device keeps its own address inside the network.

  1. From the modem to your devices

    Your modem brings the internet into the house through the cable, fiber or DSL line from your provider. The router plugs into the modem with an Ethernet cable and takes over from there. It creates the WiFi network, hands out addresses to each device that joins, and keeps track of which device asked for which page, video or file. When a reply comes back from the internet, the router sends it to the right device.

  2. The two WiFi bands

    WiFi routers send radio signals on 2 bands, 2.4 GHz and 5 GHz. The 2.4 GHz band reaches farther through walls and floors, while the 5 GHz band carries more data over a shorter distance. A dual-band router runs both at once, so a device can use the band that fits where it sits and what it does. Check the band names in the router app when a device joins the network.

  3. How a mesh system spreads the signal

    A single router can leave weak spots in rooms far from it. A mesh system uses 2 or more units that talk to each other and share 1 network name, so your device moves from 1 unit to the next without dropping the connection. Place the extra units where the signal starts to weaken, and connect the main unit to the modem. The TP-Link Deco X55 covers up to 6500 square feet with its 3 units, and the eero 6 covers up to 1,500 square feet with 1 unit.

  4. What the router does for security

    The router sits between your devices and the internet, so it can keep unwanted traffic from reaching them. It runs a firewall that checks incoming data against rules, and it can create a guest network that keeps visitors off your main network. Turn on automatic updates in the router app so the maker can patch the software when a flaw is found. The NETGEAR Nighthawk R6700AX ships with WPA3 encryption and automatic firmware updates, and the eero 6 gets automatic updates too.

What you need

TP-Link Deco X55 AX3000

TP-Link Deco X55 AX3000

A WiFi 6 mesh system with 3 units that covers up to 6500 square feet, with 3 Gigabit ports on each unit and support for up to 150 devices.

View on Amazon
Amazon eero 6 mesh

Amazon eero 6 mesh

A WiFi 6 mesh router that covers up to 1,500 square feet, supports internet plans up to 900 Mbps and connects 75+ devices.

View on Amazon
TP-Link AX1800 WiFi 6 Router

TP-Link AX1800 WiFi 6 Router

A dual-band WiFi 6 router with AX1800 speed, 4 high-gain antennas and Beamforming for coverage across the home.

View on Amazon
NETGEAR Nighthawk

NETGEAR Nighthawk

A dual-band WiFi 6 router that covers up to 1,500 square feet for up to 20 devices, with 4 Gigabit LAN ports and a separate WAN port.

View on Amazon

These come from our ranked list Best Wi-Fi Router, which compares them spec by spec.

FAQ

Do I need a modem with a WiFi router?

Yes. The modem brings the internet into the house, and the router shares it as WiFi. The TP-Link routers here need a separate modem, so check the router notes before you buy.

What is the difference between 2.4 GHz and 5 GHz?

The 2.4 GHz band reaches farther through walls and floors, while the 5 GHz band carries more data over a shorter distance. A dual-band router runs both, so devices use the band that fits their spot in the house.

Can 1 router cover a large house?

A single router may leave weak spots in rooms far from it. A mesh system adds units that share 1 network name, and the TP-Link Deco X55 covers up to 6500 square feet with 3 units.

Ranked routers guides