Amazon Black Friday Week deals

Paid link

Routers · How-to guide

How Does a Router Work?

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

A router connects your home network to the internet and shares that connection with your devices. It takes the signal from your modem, creates a Wi-Fi network, and sends each device's traffic to the right place. The router also hands out addresses on your network and moves data between your devices and the internet.

  1. From the modem to your devices

    The modem brings the internet signal into your home from your provider. The router plugs into the modem with an Ethernet cable and builds the home network around it. Your phones, laptops and TVs join that network over Wi-Fi or through an Ethernet cable. The router reads where each packet of data should go and sends it to the right device or out to the internet through the modem. Without a router, only a device could use the modem connection at a time.

  2. How Wi-Fi bands share the air

    A Wi-Fi 6 router sends its signal on 2.4 GHz and 5 GHz bands. The 2.4 GHz band reaches farther and passes through walls better, while the 5 GHz band carries more data over a shorter range. The router moves each device to the band that suits it and keeps the bands from crowding each other. Wi-Fi 6 also lets the router talk to more devices at the same time, so phones, laptops and TVs share the connection without waiting in line.

  3. What a mesh system adds

    A mesh system uses several units to cover a home. The units talk to each other and hand your phone or laptop from unit to unit as you move around, so the signal stays strong across the home. The TP-Link Deco X55 3-pack covers up to 6500 sq ft, while an Amazon eero 6 covers up to 1,500 sq ft. Add more units when rooms at the far end of the home still show a weak signal.

  4. Ports, security and setup

    Ethernet ports give wired devices a direct link to the router. The TP-Link Deco X55 has 3 Gigabit ports per unit, and the NETGEAR Nighthawk R6700AX has 4 Gigabit LAN ports for consoles, streaming players and computers. The Nighthawk uses WPA3 encryption and automatic firmware updates, and the Deco X55 includes TP-Link HomeShield with parental controls. Set the router up with the app that comes with it, and check that your provider needs a separate modem before you buy.

What you need

TP-Link Deco X55 AX3000

TP-Link Deco X55 AX3000

A Wi-Fi 6 mesh system with AX3000 speed, coverage up to 6500 sq ft, 3 Gigabit ports per unit and a 2 year warranty.

View on Amazon
Amazon eero 6 mesh

Amazon eero 6 mesh

A Wi-Fi 6 mesh router that covers up to 1,500 sq ft, supports speeds up to 900 Mbps and connects 75+ devices.

View on Amazon
TP-Link AX1800 WiFi 6 Router

TP-Link AX1800 WiFi 6 Router

A Wi-Fi 6 dual-band router with AX1800 speed, 1.8 Gbps total bandwidth, 4 high-gain antennas and a 2-year warranty.

View on Amazon
NETGEAR Nighthawk

NETGEAR Nighthawk

A Wi-Fi 6 dual-band router with AX1800 speed, 1.8 Gbps, 4 Gigabit LAN ports and coverage up to 1,500 sq ft.

View on Amazon

These come from our ranked list Best Wi-Fi Router, which compares them spec by spec.

FAQ

Do I need a modem with a router?

Yes, for most providers. The router plugs into the modem, and the modem brings the internet into your home. The TP-Link Deco X55 and the Archer AX21 need a separate modem.

What is the difference between a router and a mesh system?

A router covers a home from a box. A mesh system spreads the signal across several units, so rooms far from the main unit still get a strong signal.

How many devices can a Wi-Fi 6 router connect?

It depends on the model. The Deco X55 connects up to 150 devices, the eero 6 connects 75+ devices, and the Nighthawk R6700AX covers up to 20 devices.

Ranked routers guides