How to Connect a WiFi Extender With Ethernet
You use an Ethernet cable with a WiFi extender in two ways: to link the extender to your router for a wired backhaul, or to plug a device into the extender for a wired connection. The cable runs from an Ethernet port on one unit to an Ethernet port on the other, and the extender then shares that wired link over WiFi or passes it to the plugged-in device.
Check the Ethernet ports
Look at the ports on your extender and on your router before you run a cable. The TP-Link Deco X55 has 3 Gigabit Ethernet ports on each unit and supports wired Ethernet backhaul, and the NETGEAR Nighthawk R6700AX has 4 Gigabit LAN ports and a separate 1 Gig WAN port. A port marked LAN takes a device or a second node, and the WAN port takes the link from your modem or gateway. Count the ports you need, since one port serves one cable.
Link the extender to the router
Plug one end of the cable into a LAN port on the router and the other end into an Ethernet port on the extender. Power the extender on, then follow the setup steps in the app for your unit: the Deco app guides setup with visual steps, and the Nighthawk app gives guided setup. The extender uses the cable as its backhaul to the router, so place the extender where the cable reaches and where its WiFi covers the room you want to reach.
Wire a device to the extender
Plug a device into a LAN port on the extender when you want that device on a wired link. The Nighthawk R6700AX has 4 Gigabit LAN ports for gaming consoles, streaming players, computers, and storage drives, and the Deco X55 has 3 Gigabit Ethernet ports on each unit. The cable carries the device traffic to the extender, and the extender carries it on to the router. Use the LAN ports for devices that sit in one place, and leave WiFi for devices that move around the home.
Check coverage and device limits
Match the extender to the size of the home and the number of devices on it. The Deco X55 covers up to 6500 square feet and connects up to 150 devices, the eero 6 covers up to 1,500 square feet and connects 75 or more devices, and the Nighthawk R6700AX covers up to 1,500 square feet for up to 20 devices. The Archer AX21 is a Wi-Fi 6 router with Easy Mesh and 1.8 Gbps of total bandwidth. Check the coverage and device figures for the unit you buy, and follow the maker manual for setup.
What you need

TP-Link Deco X55 AX3000
A Wi-Fi 6 mesh system with 3 Gigabit Ethernet ports on each unit and wired Ethernet backhaul for linking nodes to the router.
View on Amazon
Amazon eero 6 mesh
A Wi-Fi 6 mesh router that covers up to 1,500 square feet, supports plans up to 900 Mbps, and connects 75 or more devices.
View on Amazon
TP-Link AX1800 WiFi 6 Router
A Wi-Fi 6 AX1800 router with Easy Mesh, 1.8 Gbps of total bandwidth, and a 2-year manufacturer warranty.
View on Amazon
NETGEAR Nighthawk
A Wi-Fi 6 AX1800 router with 4 Gigabit LAN ports, a 1 Gig WAN port, and coverage up to 1,500 square feet.
View on AmazonThese come from our ranked list Best Wi-Fi Router, which compares them spec by spec.
FAQ
Do I need an Ethernet cable for a WiFi extender?
No, an extender can join your network over WiFi, but a cable gives it a wired backhaul to the router. The Deco X55 supports wired Ethernet backhaul, so a cable from the router to a Deco unit links the two over wire instead of WiFi.
Which port do I plug the cable into?
Plug the cable into an Ethernet port on the extender and a LAN port on the router for a wired backhaul. Use the WAN port only for the link from your modem or gateway, as on the Nighthawk R6700AX, where a separate 1 Gig WAN port connects to the modem or gateway.
Can I plug a game console into the extender?
Yes, if the extender has a free LAN port. The Nighthawk R6700AX has 4 Gigabit LAN ports for gaming consoles, streaming players, computers, and storage drives, so plug the console into one of those ports with an Ethernet cable.




