How to Use a Drawing Tablet on a PC
To draw on a PC with a drawing tablet, connect the tablet with its USB cable, install the maker's driver, then open a drawing program and draw with the pen. The pen moves the cursor on screen and pressure changes the stroke, so the tablet works like a mouse that responds to how hard you press.
Connect the tablet to your PC
Plug the tablet into your PC with the USB cable that comes with it. The GAOMON M10K connects with a USB cable, and the XP-Pen Deco 01 V3 offers USB-C to USB-C connectivity plus adapters for USB C. Place the tablet flat on your desk with the pen within reach, and keep the cable clear of the drawing area so it does not pull while you draw.
Install the driver from the maker
Download and install the driver from the maker's official website, then restart the drawing program if it was already open. The GAOMON M10K instructions say to uninstall other drivers of similar products, including the old driver of the same product, before installing. After the driver is installed and your computer recognizes the tablet, the pen can move the cursor and draw.
Map the active area to your screen
The active area is the part of the tablet that tracks the pen, and it maps to your screen. Active areas here run from 6x4 inch on the HUION Inspiroy H640P and 6.5x4 inches on the GAOMON S620 to 10 x 6.25 inch on the XP-Pen Deco 01 V3 and GAOMON M10K. In the driver settings, match the active area to your display so pen movement and cursor movement line up.
Set pen pressure and shortcut keys
Pen pressure decides how the stroke responds when you press harder or softer. The HUION Inspiroy H640P, GAOMON S620 and GAOMON M10K give 8192 pressure levels, and the XP-Pen Deco 01 V3 gives 16,384 levels with up to 60 degrees of tilt. Assign the press keys to commands you use often, such as undo, zoom, brush switch or save, and set the GAOMON M10K touch ring for canvas zooming, brush adjusting or page scrolling.
Open a drawing program and draw
Open a drawing program and pick up the pen. Programs supported by these tablets include Photoshop, Krita, Clip Studio and Medibang Paint, so check the requirements published for your software before you install it. Draw a few practice strokes at light and firm pressure to check the line, then adjust the pressure settings in the driver until the stroke matches your hand.
What you need

HUION Inspiroy H640P 6x4-inch Drawing Tablet 8192 Pen Pressure
A 6x4 inch pen tablet with a battery-free PW100 stylus, 8192 pressure levels and 6 customizable press keys for Windows, Mac and Linux.
View on Amazon
XPPen Deco 01 V3 10x6 Drawing Tablet
A 10 x 6.25-inch tablet with a battery-free stylus at 16,384 pressure levels, 60 degrees of tilt and 8 customizable shortcut keys.
View on Amazon
GAOMON S620 Graphics Drawing Tablet
A 6.5x4 inch tablet with a battery-free pen, 8192 pressure levels, 4 express keys and a 266 PPS report rate.
View on Amazon
GAOMON M10K Drawing Tablet
A 10 x 6.25 inch tablet with a battery-free AP31 stylus, 8192 pressure levels, 10 press keys and a touch ring.
View on AmazonThese come from our ranked list Best Pen Tablet for PC, which compares them spec by spec.
FAQ
Do I need to charge the pen before drawing?
No. The pens with these tablets are battery-free, so the pen works when you pick it up and there is no pen battery to charge before a drawing session.
Can I use a drawing tablet with my left hand?
Yes. The HUION Inspiroy H640P can be flipped with settings adjusted in the driver, and the GAOMON S620 sets left hand mode with a 180 degree rotation in its driver. The GAOMON M10K touch ring is also available for left-handed use.
Does a drawing tablet work without a driver installed?
Install the driver first. The GAOMON M10K steps are to connect the tablet with a USB cable, then download and install the driver from the official website. Uninstall other drivers of similar products before installing.
Which programs can I draw in on a PC?
You can draw in programs such as Photoshop, Krita, Clip Studio and Medibang Paint, which these tablets support. Check the requirements published for your software before you install it.


