How to Use a Docking Station
Plug in that cable and the monitors, keyboard, mouse, network and charging all connect at once. This guide shows how to check your laptop's port, match the dock to your monitors and charging needs, and set it up on the desk.
What a docking station connects
A dock adds video outputs such as HDMI or DisplayPort, USB-A and USB-C ports for a keyboard, mouse and drives, an Ethernet port for a wired network, and often a card reader. Many docks also pass power through to the laptop, so the same cable charges it while you work. Leave the keyboard, mouse, monitors and network cable plugged into the dock, and the laptop connects to all of them with one plug.
Check your laptop's port first
A USB-C port on a laptop does not always carry video, so check the laptop manual or spec sheet for DisplayPort Alt Mode, Thunderbolt or USB4 on that port. If the port only carries data, monitors attached to the dock stay blank even though the USB ports work. The Anker and Acer docks here both need a port with video output, so confirm it before you buy.
Count the monitors and their resolution
Count how many external monitors you want and which inputs they have, then match them to the dock's video ports. The Anker dock runs one monitor at 4K at 60 Hz and two at 4K at 30 Hz, while the Acer dock runs two monitors at 4K at 60 Hz. The Dell WD25 lists support for up to four displays. Check the dock's listed resolution for one display and for two, since many docks lower the refresh rate with two monitors attached.
Match the charging wattage
Compare the power delivery figure on the dock with the charger that came with your laptop. The Anker hub passes through up to 85 W, the Acer dock delivers up to 90 W, the Dell WD25 drives up to 100 W, and the Dell WD19S delivers 130 W. A dock that passes through less power than the laptop's own charger still charges it, but more slowly under load. Some docks need a separate wall charger to pass power through, so check what comes in the box.
Plug it in and set the displays
Connect the monitors, keyboard, mouse and network cable to the dock first, then plug the dock's USB-C cable into the laptop and connect power to the dock. The laptop should see the monitors and USB devices at once; if a monitor stays blank, check the display settings on the laptop and the cable between the dock and the monitor. For a Mac, open System Settings, Privacy and Security, Accessories, and set it to Always Allow.
What you need

Anker Laptop Docking Station Dual Monitor
An 8-in-1 USB-C hub with two HDMI ports, Ethernet, a microSD and SD card reader and up to 85 W pass-through charging.
View on Amazon
Dell Pro Laptop Docking Station WD25
A USB-C dock with HDMI, DisplayPort, Ethernet and 100 W power delivery, listed with support for up to four displays.
View on Amazon
Acer USB-C Docking Station Dual Monitor
A 9-in-1 USB-C dock with two HDMI ports at 4K at 60 Hz, 100 W input and up to 90 W to the laptop, plus SD and MicroSD slots.
View on Amazon
Dell WD19S 180W Docking Station (130W Power Delivery) USB-C
A USB-C dock with HDMI and dual DisplayPort, rated at 180 W with 130 W power delivery to the laptop.
View on AmazonThese come from our ranked list Best Docking Station, which compares them spec by spec.
FAQ
Is a docking station the same as a USB-C hub?
They do the same job. Hubs are small and powered by the laptop, while docks are larger, have more ports and often take their own power supply.
Will a docking station work with a MacBook?
Many work, but macOS on some Apple chips mirrors the same picture to two monitors on a USB-C dock. Check the dock's notes for macOS before buying it for two screens.
Do I need a docking station for one monitor?
No. If your laptop has an HDMI port or a USB-C port with video output, a single cable runs one monitor. A dock helps when you also want Ethernet, more USB ports and charging through one cable.



