Amazon Black Friday Week deals

Paid link

Docks · How-to guide

How to Use Multiple Monitors

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

Connect each monitor to your laptop with a cable or through a docking station, then open the display settings and choose Extend to spread your desktop across the screens. A dock helps when your laptop has few ports: a single USB-C cable from the dock can carry video to two monitors, plus Ethernet, USB devices and charging. Check that the laptop port supports video output before you buy a dock.

  1. Check which ports your laptop has

    Look at the sides of your laptop for HDMI, DisplayPort and USB-C ports, and note which monitors you want to connect. A USB-C port does not always carry video, so check the laptop manual or spec sheet for DisplayPort Alt Mode, Thunderbolt or USB4 on that port. A port that only carries data will leave a monitor blank even though the USB ports on a dock still work.

  2. Connect the monitors with cables or a dock

    Plug each monitor into the laptop or into a docking station with a cable that matches the ports on both ends, HDMI to HDMI or DisplayPort to DisplayPort. If your laptop has few ports, plug a dock into a single USB-C port and plug the monitors into the dock. Switch each monitor on and set its input to the port you used.

  3. Arrange the displays in settings

    Open the display settings on your laptop and choose Extend so the desktop spreads across the screens instead of showing the same picture on each screen. Drag the screen icons into the same left-to-right order as the monitors sit on your desk, and pick which screen is the main display. If a monitor is not in the list, check its cable and power.

  4. Set the resolution and refresh rate

    Set each monitor to the resolution listed for it in the display settings, such as 1080p or 4K, and keep the refresh rate at 60 Hz unless the monitor and the dock both list a higher rate for that setup. If a monitor stays blank or flickers after a change, lower the refresh rate and check the cable before changing anything else.

  5. Add power and accessories through the dock

    Plug your keyboard, mouse and drives into the USB ports on the dock, and plug an Ethernet cable into the dock for a wired network. Compare the power delivery figure on the dock with the charger that came with your laptop, since a dock that passes through less power still charges the laptop, but more slowly under load. Check what comes in the box before you buy, since some docks need a separate wall charger.

What you need

Anker Laptop Docking Station Dual Monitor

Anker Laptop Docking Station Dual Monitor

An 8-in-1 USB-C hub with two HDMI ports for dual 4K displays, Ethernet, an SD and microSD card reader, and up to 85 W pass-through charging.

View on Amazon
Dell Pro Laptop Docking Station WD25

Dell Pro Laptop Docking Station WD25

A USB-C dock with HDMI and DisplayPort, Ethernet and 100 W power delivery, listed with support for up to four displays.

View on Amazon
Acer USB-C Docking Station Dual Monitor

Acer USB-C Docking Station Dual Monitor

A 9-in-1 USB-C dock with two HDMI ports for dual 4K displays at 60 Hz, 100 W input with 90 W to the laptop, and SD and MicroSD slots.

View on Amazon
Dell WD19S 180W Docking Station (130W Power Delivery) USB-C

Dell WD19S 180W Docking Station (130W Power Delivery) USB-C

A USB-C dock with HDMI and dual DisplayPort, rated at 180 W with 130 W power delivery for the laptop.

View on Amazon

These come from our ranked list Best Docking Station, which compares them spec by spec.

FAQ

Can I use two monitors with a laptop that has a single HDMI port?

Yes, with a docking station or a USB-C hub that adds video outputs, as long as the laptop's USB-C port supports video output. Check the port in your laptop's manual for DisplayPort Alt Mode, Thunderbolt or USB4 before buying.

Why does an added monitor stay blank?

The cable may be in a port that carries no video, or the display settings may still be set to mirror or to a single screen. Open the display settings, choose Extend, and check that the cable matches a video port on the laptop or dock.

Do I need a dock for two monitors?

Not always. If your laptop has two video outputs, such as HDMI and a USB-C port with video output, cables alone can run both screens. A dock helps when ports are short and you also want Ethernet, more USB ports and charging through a single cable.

Ranked docking stations guides