Amazon Black Friday Week deals

Paid link

Routers · How-to guide

How to Set Up Mesh WiFi

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

To set up mesh WiFi, place one main unit next to your modem, connect it with an Ethernet cable, and add the other units around your home so they form one network with a single name and password. The units talk to each other, so your devices stay on the same network as you move from room to room. Your system's app walks you through each step.

  1. Connect the main unit to the modem

    Unplug your modem, then plug one end of an Ethernet cable into the modem and the other end into the main mesh unit. Plug the main unit into power and plug the modem back in. Wait until the light on the main unit shows it is ready, as your system's manual describes. Place the main unit out in the open, not inside a cabinet or behind a television, so its signal reaches the rest of the home.

  2. Install the app and create the network

    Download the app for your mesh system on your phone and follow its setup steps. The app finds the main unit, then asks you to name the network and set a password. Use one network name and one password for the whole system, so your devices move between units without you switching networks by hand. Check for updates in the app once setup is done.

  3. Place the extra units halfway to the dead spots

    Put each extra unit about halfway between the main unit and the room with weak signal, in the open and at about waist height or higher. A unit hidden behind furniture or in a basement corner gives a weak link to the main unit. Walk to the far room with your phone and check the signal there. If the signal is still weak, move the unit closer to the main unit and check again.

  4. Connect devices and check the coverage

    Join your phone, laptop and other devices to the new network name with the password you set. Walk through the rooms you use most and load a page or start a video on each device to confirm the connection holds. If a room still drops the connection, move the nearest unit a little closer to the main unit, or add another unit between them. Wired devices can plug into the Ethernet ports on a unit for a wired link.

  5. If a unit will not connect

    Move the unit closer to the main unit and try again. Restart the unit by unplugging it, waiting a few seconds, and plugging it back in. If it still will not join, remove it from the app and add it again from the start. Contact the maker's support team if the unit still will not join the network.

What you need

TP-Link Deco S4 Mesh AC1900

TP-Link Deco S4 Mesh AC1900

A 3-pack Wi-Fi 5 mesh system with AC1900 dual-band speeds, coverage up to 5,500 sq. ft., 2 Gigabit Ethernet ports per unit and parental controls.

View on Amazon
TP-Link Deco S4 Whole Home Mesh

TP-Link Deco S4 Whole Home Mesh

A 2-pack Wi-Fi 5 mesh system with AC1900 dual-band speeds, coverage up to 3,800 sq. ft., 2 Gigabit Ethernet ports per unit and parental controls.

View on Amazon
Amazon eero 7 dual-band mesh

Amazon eero 7 dual-band mesh

A 2-pack Wi-Fi 7 mesh router with dual-band Wi-Fi 7, coverage up to 4,000 sq. ft., support for 120+ devices and two auto-sensing 2.5 GbE ports.

View on Amazon
Amazon eero 7 dual-band mesh

Amazon eero 7 dual-band mesh

A 3-pack Wi-Fi 7 mesh router with dual-band Wi-Fi 7, coverage up to 6,000 sq. ft., support for 120+ devices and two auto-sensing 2.5 GbE ports.

View on Amazon

These come from our ranked list Best Mesh Router, which compares them spec by spec.

FAQ

How many mesh units do I need?

It depends on the size of your home and the coverage each unit lists. A 2-pack suits a smaller home, while a 3-pack covers more rooms. Start with the pack that matches your home size and add a unit if a room still has weak signal.

Do mesh units need an Ethernet cable?

The main unit connects to the modem with an Ethernet cable. The extra units can link to the main unit over WiFi, and some units also support a wired link through their Ethernet ports for a steadier connection.

What is the difference between mesh WiFi and a range extender?

A range extender needs its own network name and password, while mesh units share one network name and password. Your devices switch between mesh units on their own as you move through your home, instead of you switching networks by hand.

Ranked routers guides