Amazon Black Friday Week deals

Paid link

Routers · How-to guide

How to Set Up an Access Point With a Router

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

An access point adds Wi-Fi to a network your router already runs. You plug the access point into the router with an Ethernet cable, set it to access point mode, and it broadcasts Wi-Fi in a room the router does not reach well. The router still hands out addresses and connects to the internet, while the access point only carries the wireless signal.

  1. What an access point does

    A router connects your home to the internet and hands out an address to each device on the network. An access point does not do that job. It takes the wired connection from the router and turns it into Wi-Fi, so a phone or laptop can join the same network from another room. If the router already covers the whole home, an access point adds nothing. It helps where the router signal is weak.

  2. Connect the access point to the router

    Run an Ethernet cable from a LAN port on the router to the Ethernet port on the access point. Put the access point in the room that needs Wi-Fi, close enough to the router for the cable to reach. Plug in the power and wait for the lights to show it is on. A wired link between the two boxes carries the traffic, so the access point does not need to fight for a wireless signal of its own.

  3. Switch the unit to access point mode

    Open the app or admin page for the access point and look for its mode setting. Choose access point mode, which turns off the routing and address features so the main router stays in charge of the network. Save the setting and let the unit restart. If the unit asks for the router address or a connection type, follow the steps in the maker's manual for your model.

  4. Set the Wi-Fi name and password

    Give the access point a Wi-Fi name and password in its app or admin page. You can use the same name and password as the router, so devices see one network as you move through the home, or a different name so you can pick the access point by hand. Set the same security type the router uses. Write down the name and password you chose, then save the settings.

  5. Check the connection from the far room

    Stand in the room the access point serves and join its Wi-Fi with a phone or laptop. Open a web page or start a video call to confirm the connection works. If the signal is weak, move the access point closer to the router or to a spot with fewer walls between the two boxes. Check the maker's app for firmware updates and install them when the app offers them.

What you need

TP-Link Deco X55 AX3000

TP-Link Deco X55 AX3000

A Wi-Fi 6 mesh system with 3 Gigabit Ethernet ports per unit and wired Ethernet backhaul, and any unit can work as a Wi-Fi router.

View on Amazon
Amazon eero 6 mesh

Amazon eero 6 mesh

A Wi-Fi 6 mesh router that covers up to 1,500 sq. ft. and connects 75+ devices, set up through the eero app.

View on Amazon
TP-Link AX1800 WiFi 6 Router

TP-Link AX1800 WiFi 6 Router

A dual-band Wi-Fi 6 router with AX1800, Easy Mesh support and 4 high-gain antennas.

View on Amazon
NETGEAR Nighthawk

NETGEAR Nighthawk

A dual-band Wi-Fi 6 router with AX1800, four Gigabit Ethernet ports and a separate WAN port, set up through the Nighthawk app.

View on Amazon

These come from our ranked list Best Wi-Fi Router, which compares them spec by spec.

FAQ

Do I still need my router with an access point?

Yes. The router connects to the internet and hands out addresses to the devices on the network. The access point only adds Wi-Fi, so it cannot replace the router.

Should the access point use the same Wi-Fi name?

Either choice works. The same name lets devices move between the router and the access point without you picking a network, while a different name lets you connect to the access point by hand.

Does the access point need a cable to the router?

For this setup, yes. An Ethernet cable runs from the router to the access point and carries the traffic. The Deco X55 supports wired Ethernet backhaul for the link between its units.

Can a mesh router work as an access point?

Check the mode settings in the maker's app for your model. The Deco X55 units can each work as a Wi-Fi router, and the Archer AX21 supports Easy Mesh for adding units to a mesh network.

Ranked routers guides