Amazon Black Friday Week deals

Paid link

Routers · How-to guide

How to Set Up a WiFi Router

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

To set up a WiFi router, plug the router into power and connect it to your modem with an Ethernet cable, then open the router's app or setup page and follow its steps to name the network and set a password. Place the router in a central spot, and check that your devices join the new network. The steps below walk through each part in order.

  1. Connect the router to the modem

    Plug an Ethernet cable into your modem and plug the other end into the port on the router marked WAN or Internet. Then plug the modem and the router into power and wait for their lights to settle. If the modem and router share a box, skip the cable and plug that box into power.

  2. Place the router in a central spot

    Put the router near the middle of your home, out in the open and raised off the floor, such as on a shelf or a table. Walls, floors and large metal objects weaken the signal between the router and your devices, so keep it away from thick walls, mirrors and metal cabinets. Leave space around the router so air can move past it, and keep it within reach of the modem cable.

  3. Name the network and set a password

    Open the router's app on your phone, or type the setup address from the router's manual into a browser, and follow the setup steps. Give the network a name you will recognize, then set a password that mixes letters, numbers and symbols. Write the password down somewhere you can find it, and do not share it with people outside your home.

  4. Use the 2.4 GHz and 5 GHz bands

    Many routers show networks on the 2.4 GHz band and the 5 GHz band. The 2.4 GHz band reaches farther through walls, while the 5 GHz band suits use close to the router. Join the 5 GHz network when you are near the router and the 2.4 GHz network farther away. If your router offers a combined network name, use that and let the router pick the band for each device.

  5. Connect your devices to the network

    On each phone, laptop and TV, open the WiFi settings, pick the new network name and enter the password. Start with the devices you use most, then add the rest. If a device will not join, move it closer to the router and try the password again, and check that you typed it as set.

What you need

TP-Link Deco X55 AX3000

TP-Link Deco X55 AX3000

A Wi-Fi 6 mesh system in a 3-pack that covers up to 6500 sq ft, connects up to 150 devices, and gives each unit 3 Gigabit ports.

View on Amazon
Amazon eero 6 mesh

Amazon eero 6 mesh

A Wi-Fi 6 router that covers up to 1,500 sq ft, supports speeds up to 900 Mbps, connects 75+ devices, and sets up through the eero app.

View on Amazon
TP-Link AX1800 WiFi 6 Router

TP-Link AX1800 WiFi 6 Router

An AX1800 Wi-Fi 6 dual-band router with 1.8 Gbps total bandwidth, 4 high-gain antennas, and support for OpenVPN and PPTP VPN servers.

View on Amazon
NETGEAR Nighthawk

NETGEAR Nighthawk

An AX1800 Wi-Fi 6 dual-band router that covers up to 1,500 sq ft, serves up to 20 devices, and has 4 Gigabit LAN ports plus a WAN port.

View on Amazon

These come from our ranked list Best Wi-Fi Router, which compares them spec by spec.

FAQ

Do I need a modem as well as a router?

Yes. The modem brings the internet into your home, and the router shares it with your devices over WiFi. Some providers give you a combined modem and router, so check with your provider.

Can I use my old network name and password?

Yes. Using the same name and password lets your devices join without new setup, since they already know that network. Change the password if other people know it.

Why does my WiFi drop in some rooms?

Walls, floors and distance weaken the signal. Move the router to a more central spot, or move closer to it when the link drops. A mesh system adds extra units that share the same network across more rooms.

Ranked routers guides