How to Set Up an Internet Router
To set up an internet router, plug the router into the modem, plug in the power, and follow the setup steps in the maker's app. The app names the network, sets the Wi-Fi password, and checks for firmware updates. Once the app shows the network as online, connect your phones, laptops, and TVs to the new Wi-Fi name.
Connect the modem and the router
Connect an Ethernet cable from the modem to the WAN port on the router, then plug the router into power. The Nighthawk lists a separate 1 Gig WAN port for the modem and four 1 Gig LAN ports for wired devices. Wait for the router lights to settle before opening the app.
Set up the network in the app
Open the maker's app on your phone and follow the setup steps. The Deco app gives clear visual guidance, the eero app walks you through setup, and the Nighthawk app gives guided setup. Give the network a name, set a Wi-Fi password, and let the app check for a firmware update. Write the password down and keep it where you can find it.
Place the router and connect your devices
Put the router in a central spot, out in the open and off the floor, so the signal reaches more rooms. Connect phones, laptops, and TVs to the new Wi-Fi name with the password you set. For a larger home, a mesh system adds units that share a single network name: the Deco X55 covers up to 6500 square feet with its 3-pack, and the eero 6 covers up to 1,500 sq. ft. as a 1-pack.
Check the speed and the coverage
Walk through the house with a phone and check the Wi-Fi bars in each room. A weak signal in a far room means the router is too far away or weakened by walls and floors. Move the router to a more central spot, or add a mesh unit that shares the network name. If the whole house is slow, check the speed in your internet plan, since the router cannot exceed the plan.
When the setup asks for a modem
A router shares a single internet connection with your devices, and a modem brings that connection into the house. The Archer AX21 states that all WiFi routers require a separate modem. The Nighthawk pairs with a modem or gateway through Ethernet, and the Deco X55 works with most internet service providers with a modem. If the modem and router come in a single box from your provider, check the provider's manual for bridge mode before adding a router.
What you need

TP-Link Deco X55 AX3000
A Wi-Fi 6 AX3000 mesh system in a 3-pack that covers up to 6500 square feet, connects up to 150 devices, and sets up through the Deco app.
View on Amazon
Amazon eero 6 mesh
A Wi-Fi 6 mesh router that covers up to 1,500 sq. ft., supports speeds up to 900 Mbps, connects 75+ devices, and includes a Zigbee smart home hub.
View on Amazon
TP-Link AX1800 WiFi 6 Router
A dual-band Wi-Fi 6 AX1800 router with 1.8 Gbps total bandwidth, 4 high-gain antennas, and a VPN server.
View on Amazon
NETGEAR Nighthawk
A dual-band Wi-Fi 6 AX1800 router that covers up to 1,500 sq. ft., serves 20 devices, and has 4 Gigabit LAN ports plus a 1 Gig WAN port.
View on AmazonThese come from our ranked list Best Wi-Fi Router, which compares them spec by spec.
FAQ
Do I need a modem to set up a router?
Yes, for most internet service providers. The Archer AX21 states that all WiFi routers require a separate modem, and the Nighthawk pairs with a modem or gateway through Ethernet. Check with your provider if the modem and router come in a single box.
What is the difference between a router and a mesh system?
A single router broadcasts from one unit, while a mesh system uses 2 or more units that share a single network name. The Deco X55 is a 3-pack mesh system that covers up to 6500 square feet, and the eero 6 is a 1-pack that covers up to 1,500 sq. ft.
Why is my Wi-Fi slow in one room?
The router may be too far away, or walls and floors may weaken the signal. Move the router to a more central spot, or add a mesh unit. If the whole house is slow, check the speed in your internet plan.
Can I use any router with my internet provider?
The Deco X55, Archer AX21, and Nighthawk all state that they work with most internet service providers. Check that your provider needs a separate modem, and check the router's app for the setup steps.




