Amazon Black Friday Week deals

Paid link

Routers · How-to guide

How to Connect a Wi-Fi Router to a PC With LAN

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

Plug a LAN cable from a LAN port on the Wi-Fi router into the Ethernet port on the PC, then turn on the modem, the router and the PC. The PC uses the cable for its connection, and the router still sends Wi-Fi to your other devices. Set up the router with its app after the cable is in place.

  1. Connect the modem to the router

    Place the router near the modem and the PC, then connect the modem to the router with an Ethernet cable. Plug one end into the modem and the other end into the WAN or Internet port on the router. Routers need a separate modem for most internet providers, so keep the modem in the chain and plug both boxes into power.

  2. Plug the LAN cable into the PC

    Take a LAN cable and plug one end into a LAN port on the router. Plug the other end into the Ethernet port on the PC until it clicks. Keep the cable run short and clear of doors and chair wheels, and leave a little slack at both ends so the plugs are not pulled tight.

  3. Turn everything on and check the lights

    Turn on the modem first, then turn on the router, then turn on the PC. Watch the lights on the router and the PC Ethernet port. A lit link light at both ends shows the cable link is up. If a light stays dark, push each plug in again and try a different LAN port on the router.

  4. Finish setup and confirm the connection

    Open the router app or setup page named in the router guide and follow the setup steps. Set the Wi-Fi name and password, then check that the PC shows a wired connection. Open a web page on the PC to confirm the link carries traffic. If the page does not load, restart the modem, router and PC in that order.

What you need

TP-Link Deco X55 AX3000

TP-Link Deco X55 AX3000

A Wi-Fi 6 AX3000 mesh system with 3 Gigabit Ethernet ports per unit and wired Ethernet backhaul, so a PC can plug into any unit.

View on Amazon
Amazon eero 6 mesh

Amazon eero 6 mesh

A Wi-Fi 6 mesh router listed for internet plans up to 900 Mbps, with coverage up to 1,500 sq. ft. and support for 75+ devices.

View on Amazon
TP-Link AX1800 WiFi 6 Router

TP-Link AX1800 WiFi 6 Router

A dual band Wi-Fi 6 AX1800 router with Gigabit ports, listed for use with a separate modem from your internet provider.

View on Amazon
NETGEAR Nighthawk

NETGEAR Nighthawk

A dual band Wi-Fi 6 AX1800 router with four 1 Gig Ethernet LAN ports for computers and a separate 1 Gig WAN port for the modem.

View on Amazon

These come from our ranked list Best Wi-Fi Router, which compares them spec by spec.

FAQ

Can I plug the PC into any LAN port on the router?

Yes. Plug the LAN cable into any free LAN port on the router and the other end into the Ethernet port on the PC. If one port does not work, try another LAN port on the router.

Which router port does the PC cable use?

Plug the modem into the router WAN port, then plug the PC into a LAN port on the router. The WAN port faces the internet, and the LAN ports face your own devices.

Do I still need Wi-Fi on the PC?

No. Once the cable links the PC to the router, the wired connection works on its own. You can turn the PC Wi-Fi off and keep using the cable.

Ranked routers guides