Amazon Black Friday Week deals

Paid link

Routers · How-to guide

How to Connect a WiFi Router to the Internet

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

Plug an Ethernet cable from your modem into the router's WAN or internet port, plug in the power, and open the router's app to finish setup. The app names the network, and your devices then join it over Wi-Fi. You need a modem and an Ethernet cable; the router alone does not connect to the internet.

  1. Connect the router to the modem

    Find the Ethernet port on your modem and the WAN port on the router. Plug one end of an Ethernet cable into the modem and the other end into the router's WAN port. Most WiFi routers need a separate modem, so a router on its own cannot reach the internet unless it is a modem-router combo unit. If your modem and router are one box, put the box in bridge mode first.

  2. Plug in power and wait

    Plug the router's power adapter into a wall outlet and into the router. Give the router a few minutes to start before you open the app. The router is ready when the app finds it and walks you through setup.

  3. Finish setup in the app

    Open the app for your router: the Deco app for the Deco X55, the eero app for the eero 6, the Tether app for the Archer AX21, or the Nighthawk app for the Nighthawk R6700AX. The app walks you through each step and asks you to name the network and set a password. Follow the steps in order and keep the router on while the app finishes.

  4. Connect your devices

    Once setup finishes, join the new network name from each phone, laptop and TV. Devices connect over the 2.4 GHz and 5 GHz bands, and Wi-Fi 6 routers such as these four also support earlier Wi-Fi versions. If a device sits far from the router, move it closer or plug it into a LAN port with an Ethernet cable.

What you need

TP-Link Deco X55 AX3000

TP-Link Deco X55 AX3000

A Wi-Fi 6 mesh system with 3 Gigabit ports per unit and coverage up to 6500 square feet, set up through the Deco app.

View on Amazon
Amazon eero 6 mesh

Amazon eero 6 mesh

A Wi-Fi 6 router for internet plans up to 900 Mbps, covering up to 1,500 sq. ft. and connecting 75+ devices.

View on Amazon
TP-Link AX1800 WiFi 6 Router

TP-Link AX1800 WiFi 6 Router

A dual-band Wi-Fi 6 router with Gigabit ports, Easy Mesh, and support for Alexa.

View on Amazon
NETGEAR Nighthawk

NETGEAR Nighthawk

A dual-band Wi-Fi 6 router with four Gigabit LAN ports, a separate WAN port, and guided setup in the Nighthawk app.

View on Amazon

These come from our ranked list Best Wi-Fi Router, which compares them spec by spec.

FAQ

Do I need a modem to connect a router?

Most WiFi routers need a separate modem, and the router plugs into the modem with an Ethernet cable. The Deco X55 notes that a modem is required for most internet service providers.

Can I use any router with my internet provider?

The Deco X55 and Archer AX21 each list Comcast, Xfinity, Spectrum and Verizon among the providers they work with.

Why does my router need an Ethernet cable?

The router connects to the modem through its WAN port with an Ethernet cable, and wired devices can use the LAN ports. The Nighthawk R6700AX has four Gigabit LAN ports plus a separate WAN port for the modem.

Ranked routers guides