How to Connect a Router with a LAN Cable
To connect a router with a LAN cable, plug one end of an Ethernet cable into a LAN port on the router and the other end into the Ethernet port on your computer, console, or other device. The wired link carries your internet traffic without Wi-Fi, and the router's WAN port connects separately to your modem. Once both ends click in, the device should pick up the connection.
Plug the router into the modem
Start with the link that brings the internet in. Plug one end of an Ethernet cable into the WAN port on the back of the router, and the other end into the Ethernet port on your modem. Power on the modem first, wait for its lights to settle, then power on the router and wait for its status light to show it is ready. A cable plugged into a LAN port here will not bring the internet in, so use the WAN port for the modem connection.
Connect your device to a LAN port
Pick a LAN port on the router and plug one end of an Ethernet cable into it. Plug the other end into the Ethernet port on your computer, game console, TV, or streaming box. Push each connector in until it clicks, since a plug that is not fully seated will not carry a link. A USB Ethernet adapter or a dock with an Ethernet port adds a wired connection to a laptop or tablet.
Check that the link is up
Look at the lights next to the LAN port on the router and the Ethernet port on your device. A lit or blinking light means the cable is connected and traffic is passing. On your computer, open the network settings and confirm it shows a wired or Ethernet connection rather than Wi-Fi. If the light is dark, reseat both ends of the cable, try a different LAN port, and try another cable before you change any settings.
Use LAN for devices that stay put
A cable suits devices that do not move, such as a desktop PC, a game console, or a TV, since the wired link does not depend on Wi-Fi signal strength through walls. Keep the cable run short and clear of walkways, and avoid sharp bends or pinching it under furniture. If the router is far from the device, move the router closer to the modem or route the cable along a wall, and leave Wi-Fi for phones and laptops that move around the home.
What you need

TP-Link Deco X55 AX3000
A Wi-Fi 6 AX3000 mesh system with 3 Gigabit Ethernet ports on each unit and Ethernet backhaul, covering up to 6500 sq ft.
View on Amazon
Amazon eero 6 mesh
A Wi-Fi 6 mesh router that supports internet plans up to 900 Mbps and covers up to 1,500 sq ft for 75+ devices.
View on Amazon
TP-Link AX1800 WiFi 6 Router
A dual-band Wi-Fi 6 router with AX1800 speed class, Gigabit ports, and a 2-year warranty.
View on Amazon
NETGEAR Nighthawk
A Wi-Fi 6 router with four Gigabit LAN ports and a separate WAN port for the modem, covering up to 1,500 sq ft.
View on AmazonThese come from our ranked list Best Wi-Fi Router, which compares them spec by spec.
FAQ
Which port do I plug the LAN cable into?
Plug the cable into a LAN port on the router, not the WAN port. The WAN port is for the modem, while the LAN ports are for your devices. If the router has numbered LAN ports, any of them works for a computer or console.
Do I need Wi-Fi on after plugging in a LAN cable?
No. A wired device uses the cable and does not need Wi-Fi turned on. You can switch off Wi-Fi on that device so it stays on the wired link, and the router keeps broadcasting Wi-Fi for your other devices.
Why does my device show no connection after I plug in the cable?
First check both ends of the cable are fully clicked in and the port lights are on. Then try a different LAN port on the router and a different cable. If the link still stays down, restart the modem and the router, then check the device's network settings.




