How to Connect a Router to a Wall
To connect a router to the wall, plug its power adapter into a wall outlet and run an Ethernet cable from the wall jack or modem to the router's WAN port. Then plug in the modem if you have one, wait for the lights to settle, and finish setup in the router app. The steps below walk through each connection in order.
Find the wall jack and outlet
Start by finding the wall jack your internet service uses and a power outlet near it. The jack may be a phone socket, a coax socket or an Ethernet port, depending on your provider. Pick a spot for the router close to both, out in the open and away from thick walls and large metal objects, so the power cable and the Ethernet cable reach without stretching.
Connect the modem to the wall jack
If your service uses a modem, connect it to the wall jack with the cable your provider gave you, then plug the modem into the power outlet and switch it on. Wait until its lights stop blinking and show a steady connection. If your provider gave you a gateway that combines a modem and a router, connect that box straight to the wall jack instead and skip the next step.
Plug the router into the wall outlet
Plug the router power adapter into the wall outlet and switch the router on. Then run an Ethernet cable from the modem LAN port to the router WAN port, pushing each plug in until it clicks. The router lights should come on and settle after a short wait; if a light stays red or keeps blinking, check that both plugs sit fully in their ports.
Finish setup in the router app
Open the router app on your phone — the Deco app for the TP-Link Deco X55, the eero app for the eero 6, the Tether app for the TP-Link Archer AX21, or the Nighthawk app for the NETGEAR Nighthawk R6700AX — and follow its setup steps to name your network and set a password. Check that your phone connects to the new network, then open a page or a video to confirm the connection works.
What you need

TP-Link Deco X55 AX3000
A Wi-Fi 6 mesh system with 3 Gigabit ports per unit, Ethernet backhaul and coverage up to 6500 square feet.
View on Amazon
Amazon eero 6 mesh
A Wi-Fi 6 router that covers up to 1,500 square feet, connects 75+ devices and has a built-in Zigbee smart home hub.
View on Amazon
TP-Link AX1800 WiFi 6 Router
An AX1800 Wi-Fi 6 router with 4 high-gain antennas, Beamforming and support for OpenVPN and PPTP VPN servers.
View on Amazon
NETGEAR Nighthawk
An AX1800 Wi-Fi 6 router with 4 Gigabit LAN ports, a separate WAN port and coverage up to 1,500 square feet.
View on AmazonThese come from our ranked list Best Wi-Fi Router, which compares them spec by spec.
FAQ
Do I need a modem to connect a router to the wall?
Yes, if your internet comes through a cable or phone line: the modem connects to the wall jack, and the router connects to the modem. Some providers use a gateway that combines both, so check what your provider gave you.
Can I plug a router into any wall outlet?
Yes, any standard wall outlet near the wall jack works. Keep the router close to the outlet and the jack so the power cable and the Ethernet cable reach without stretching.
Why does my router stay offline after I plug it in?
Check that the modem is plugged into the wall jack and powered on, and that the Ethernet cable runs from the modem to the router WAN port. Then restart the modem and the router, and wait for the lights to settle before opening a page again.




