Amazon Black Friday Week deals

Paid link

Routers · How-to guide

How to Connect a Router to a PC

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

Connect your PC to the router with an Ethernet cable for a wired link, or with Wi-Fi for a wireless link. A wired link uses a cable from an Ethernet port on the router to the Ethernet port on your PC. A wireless link uses the Wi-Fi name and password from the router. Pick the wired link when your PC sits near the router.

  1. Choose a wired or wireless link

    A wired link runs an Ethernet cable from the router to your PC, and a wireless link connects your PC to the router over Wi-Fi. A wired link suits a PC that sits near the router, since the cable has to reach from one to the other. A wireless link suits a PC in another room, since it needs no cable at all. Check whether your PC has an Ethernet port before you pick the wired link. If your PC connects over Wi-Fi, pick the wireless link.

  2. Plug the cable into the router

    Take an Ethernet cable and plug one end into a LAN port on the router. Do not use the port that connects the router to the modem. Plug the other end into the Ethernet port on your PC. Push each plug in until it clicks into place, and check that the cable is not pulled tight or bent sharply. Your PC should show that a wired network is connected. If nothing shows, pull the plugs out and push them back in.

  3. Join the Wi-Fi network

    Open the Wi-Fi settings on your PC and look for the network name for your router. Pick that name and enter the password that came with the router. If your PC asks whether the network is private or public, pick the option for your home network. Wait for your PC to show that it is connected. If the network name does not appear, move the PC closer to the router and look again.

  4. Check the connection on your PC

    Open a browser on your PC and visit a page you know. If the page loads, the link to the router works. If it does not load, check that the cable is pushed in at both ends or that Wi-Fi is switched on and joined to the right network. Restart the PC and the router, then try the page again. If the page still does not load, check the setup steps in the manual for your router.

  5. Finish setup in the router app

    The Deco, eero and Nighthawk routers in this guide each come with an app that walks you through setup and lets you manage the network from your phone. Download the app for your router, open it, and follow the steps it shows to name the network and set a password. Keep the app on your phone so you can check the network and change settings later. If the app asks for an update, follow the steps it shows.

What you need

TP-Link Deco X55 AX3000

TP-Link Deco X55 AX3000

A Wi-Fi 6 mesh system with 3 Gigabit Ethernet ports on each unit and support for wired Ethernet backhaul, with the Deco app for setup.

View on Amazon
Amazon eero 6 mesh

Amazon eero 6 mesh

A Wi-Fi 6 router with a built-in Zigbee smart home hub and the eero app for setup, listed for 75+ connected devices.

View on Amazon
TP-Link AX1800 WiFi 6 Router

TP-Link AX1800 WiFi 6 Router

A dual-band Wi-Fi 6 AX1800 router with Easy Mesh, 4 high-gain antennas and VPN server support.

View on Amazon
NETGEAR Nighthawk

NETGEAR Nighthawk

A dual-band Wi-Fi 6 AX1800 router with 4 Gigabit Ethernet LAN ports and a separate WAN port, managed through the Nighthawk app.

View on Amazon

These come from our ranked list Best Wi-Fi Router, which compares them spec by spec.

FAQ

Do I need a modem as well as a router?

Yes, for most internet providers. The modem brings the internet into your home, and the router shares it with your PC and other devices. Check with your provider if you are unsure.

Can I connect my PC to the router with Wi-Fi?

Yes. Open the Wi-Fi settings on your PC, pick the network name for your router, and enter its password. The link works without a cable, as long as your PC is in range of the router.

Which port on the router takes the cable to my PC?

Use a LAN port on the router, not the port that connects to the modem. The cable from a LAN port goes to the Ethernet port on your PC.

Ranked routers guides