How to Connect a Router to the Internet
To connect a router to the internet, plug the router's WAN or internet port into your modem with an Ethernet cable, then plug the modem and router into power. Wait for the lights to settle, then open the router's app or web page and follow the setup steps to name your network and set a password. Once the setup finishes, your devices can join the new Wi-Fi network.
Check what your internet service needs
Most internet services reach your home through a modem, and the router plugs into that modem. If your provider gave you a single box that is both a modem and a router, check whether it can run in bridge mode, since a second router behind it can cause conflicts. Some fiber services plug straight into the router, so check the instructions from your provider before you start.
Connect the modem to the router
Use an Ethernet cable to join the modem's Ethernet port to the WAN or internet port on the router. The WAN port is often a different color or set apart from the other ports. The other Ethernet ports on the router are for wired devices such as a computer or a game console, so leave them free for now and use the WAN port for the modem.
Power up and wait for the lights
Plug the modem into power first and wait until its lights stop blinking, then plug the router into power. Give the router a few minutes to start up and show a steady light for the internet connection. If the internet light stays off or keeps blinking, unplug both boxes, plug the modem back in first, then the router.
Run the router's setup app
Open the router's setup app and follow the steps it shows. Download the app named in the router's quick-start guide, create an account if it asks, and follow the prompts to name your Wi-Fi network and set a password. For setup through a web page, connect a computer to the router with an Ethernet cable or to its default Wi-Fi name and open the setup page named in the guide.
Connect your devices and check the connection
Join the new Wi-Fi network from your phone or laptop and open a web page to check that pages load. If a page does not load, move closer to the router and check that the modem and router lights are steady. For a computer or console that stays in one place, plug it into one of the router's Ethernet ports for a wired link.
What you need

TP-Link Deco X55 AX3000
A Wi-Fi 6 mesh system with three units, three Gigabit ports per unit and coverage for up to 6500 square feet.
View on Amazon
Amazon eero 6 mesh
A Wi-Fi 6 router with coverage up to 1,500 sq. ft., support for internet plans up to 900 Mbps and a built-in Zigbee smart home hub.
View on Amazon
TP-Link AX1800 WiFi 6 Router
A dual-band Wi-Fi 6 router with AX1800 speed class, four high-gain antennas and support for OpenVPN and PPTP VPN servers.
View on Amazon
NETGEAR Nighthawk
A dual-band Wi-Fi 6 router with AX1800 speed class, four Gigabit LAN ports, a separate WAN port and coverage up to 1,500 sq. ft.
View on AmazonThese come from our ranked list Best Wi-Fi Router, which compares them spec by spec.
FAQ
Do I need a modem to connect a router to the internet?
For most internet services, yes. The modem brings the service into your home and the router shares it over Wi-Fi and Ethernet. Some fiber services connect straight to the router, so check the instructions from your provider.
Which port do I plug the modem into on the router?
Plug the modem into the WAN or internet port, which is often a different color or set apart from the other ports. The other ports are for wired devices such as a computer or a game console.
Why is my router offline after setup?
Check that the modem is powered on and its lights are steady, and that the Ethernet cable runs from the modem to the router's WAN port. If the lights stay off, unplug both boxes, plug the modem back in first, then the router, and run the setup again.




