Amazon Black Friday Week deals

Paid link

Routers · How-to guide

How to Connect a Router to the Internet

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

Connect your modem to the router with an Ethernet cable, plug the router in, and finish setup in the maker's app. The router then broadcasts a Wi-Fi network, and your phones, laptops and TVs join it with the network name and password.

  1. Plug the modem into the router

    Connect an Ethernet cable from the modem to the WAN port on the router, then plug the modem and router into power. The NETGEAR Nighthawk R6700AX has a separate 1 Gig WAN port for the modem, and its four 1 Gig Ethernet LAN ports take wired devices. Wait for the lights on the modem and router to settle before you open the setup app.

  2. Set up the network in the app

    Open the maker's app and follow the on-screen steps to name the network and set a password. The Deco app, the eero app and the Nighthawk app each walk through setup, and the apps also manage the network after setup. Keep the modem powered on and the Ethernet cable in place while the app finishes.

  3. Join devices to the Wi-Fi network

    On a phone, laptop or TV, open the Wi-Fi list, pick the network name you set, and enter the password. Wi-Fi 6 routers use the 2.4 GHz and 5 GHz bands. The NETGEAR Nighthawk R6700AX lists speeds up to 1.8 Gbps across the 2.4 GHz and 5 GHz bands, and the TP-Link Archer AX21 lists up to 1200 Mbps on 5 GHz and up to 574 Mbps on 2.4 GHz.

  4. Add coverage where the signal is weak

    If a room has a weak signal, add a mesh unit or move the router to a central spot. The TP-Link Deco X55 covers up to 6500 square feet as a 3-pack, and the Amazon eero 6 covers up to 1,500 sq. ft. with one router. The NETGEAR Nighthawk R6700AX covers up to 1,500 sq. ft. for up to 20 connected devices, so a larger home may need a mesh system.

  5. Match the router to your devices

    Count the phones, laptops, TVs and smart home devices on your network, then match the count to the router. The TP-Link Deco X55 connects up to 150 devices, the Amazon eero 6 connects 75+ devices, and the NETGEAR Nighthawk R6700AX covers up to 20 connected devices.

What you need

TP-Link Deco X55 AX3000

TP-Link Deco X55 AX3000

A Wi-Fi 6 AX3000 mesh system in a 3-pack that covers up to 6500 square feet, with 3 Gigabit ports per unit and Ethernet backhaul.

View on Amazon
Amazon eero 6 mesh

Amazon eero 6 mesh

A Wi-Fi 6 mesh router that covers up to 1,500 sq. ft., supports speeds up to 900 Mbps, and connects 75+ devices.

View on Amazon
TP-Link AX1800 WiFi 6 Router

TP-Link AX1800 WiFi 6 Router

A Wi-Fi 6 AX1800 dual-band router with 1.8 Gbps total bandwidth, 4 high-gain antennas, and Easy Mesh support.

View on Amazon
NETGEAR Nighthawk

NETGEAR Nighthawk

A Wi-Fi 6 AX1800 dual-band router with 4 Gigabit LAN ports, a 1 Gig WAN port, and coverage up to 1,500 sq. ft.

View on Amazon

These come from our ranked list Best Wi-Fi Router, which compares them spec by spec.

FAQ

Do I need a modem to connect a router?

Yes, for most internet service providers. The TP-Link Deco X55 and the TP-Link Archer AX21 both state that a separate modem is required, and the NETGEAR Nighthawk R6700AX pairs with a modem or gateway through Ethernet.

Can I connect a router without an Ethernet cable?

The modem still connects to the router through Ethernet, but your devices join the router over Wi-Fi. The NETGEAR Nighthawk R6700AX connects to the modem through its WAN port, and phones, laptops and TVs then join the Wi-Fi network.

How do I change the Wi-Fi name and password?

Open the maker's app for your router and use its network settings. The eero app manages the network from anywhere, the Nighthawk app manages WiFi from anywhere, and the Deco app keeps you in control of the network even when you are not home.

Ranked routers guides