How to Connect a Router to Apartment Wi-Fi
Connect your router WAN or Internet port to the apartment modem, gateway or ethernet wall port with an ethernet cable, then create your own network name and password in the router app or setup page. If your apartment provides wifi with no ethernet port, check your router manual for a repeater or bridge mode before you start.
Check what your apartment provides
Look for an ethernet wall port, a modem, or a combined modem and router gateway in your unit. Note the network name and password your building or provider gave you, and check your lease or building rules for limits on personal routers. If you find only a building wifi network with no ethernet port and no modem, your connection path depends on the modes your router supports, so keep your router manual nearby for the next steps.
Connect the router with an ethernet cable
Run an ethernet cable from the modem, gateway or ethernet wall port to the WAN or Internet port on your router. Plug in the router power cord and wait until its lights settle into a steady pattern. If your unit has a combined modem and router gateway, check the gateway manual for bridge mode or access point settings, since two routers handing out addresses on one network can cause connection problems for your devices.
Handle a wifi-only apartment
A building wifi network with no ethernet port gives your router no wired input to plug into. Check your router manual for repeater, bridge or wireless client modes that join an existing wifi network and share it on your own network name. Use the repeater, bridge or wireless client mode in your router manual, and ask your building or provider whether an ethernet port or modem access is available in your unit before you buy any extra gear.
Set up your network name and password
Open the router app or setup page and follow the setup screens in order. Create your own network name and a password you do not reuse on other accounts, and pick a security option from the choices the setup screens offer. Check for firmware updates in the app or setup page and install any update the router offers. Write down the network name and password and keep the note with your router manual.
Place the router and connect your devices
Place the router in an open spot near the rooms where you use your devices, away from thick walls and large metal objects where you can. Connect your phone, laptop and other devices to your new network name with the password you set. If a device shows no internet connection, confirm the cable sits in the WAN or Internet port, restart the modem or gateway first and the router second, and then check the connection again.
What you need

TP-Link Deco X55 AX3000
A Wi-Fi 6 mesh system with 3 Gigabit Ethernet ports per unit, Ethernet backhaul support and coverage up to 6500 square feet.
View on Amazon
Amazon eero 6 mesh
A Wi-Fi 6 mesh router that supports internet plans up to 900 Mbps, covers up to 1,500 sq. ft. and connects 75+ devices.
View on Amazon
TP-Link AX1800 WiFi 6 Router
A dual-band Wi-Fi 6 router with AX1800 bandwidth up to 1200 Mbps on 5 GHz and 574 Mbps on 2.4 GHz, plus 4 antennas.
View on Amazon
NETGEAR Nighthawk
A dual-band Wi-Fi 6 router with 4 Gigabit LAN ports, a separate WAN port and coverage up to 1,500 sq ft for 20 devices.
View on AmazonThese come from our ranked list Best Wi-Fi Router, which compares them spec by spec.
FAQ
Can I use my own router with wifi only?
Check your router manual for repeater, bridge or wireless client modes that join an existing wifi network. Use the mode in your router manual, and ask your building or provider about an ethernet port or modem access in your unit.
Do I need a modem for my own router?
Your router connects to the modem, gateway or ethernet wall port your apartment provides. If your unit has a modem or gateway, run the cable from that box to your router WAN or Internet port and follow the setup screens.
Why does my router show no internet connection?
Confirm the ethernet cable sits in the WAN or Internet port on your router. Restart the modem or gateway first and the router second, wait for steady lights, and check the gateway manual for bridge mode settings if problems continue.




