Amazon Black Friday Week deals

Paid link

Routers · How-to guide

How to Connect a New Router to the Internet

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

To connect a new router to the internet, plug the router into your modem with an Ethernet cable, power on the modem first and then the router, and set up the network and password in the maker's app or setup page. Once the router's lights show it is online, join the Wi-Fi from your phone or laptop and check that pages load.

  1. Check the modem and the cables

    Find the modem your internet service uses and check that it is powered on and its lights show a connection. If your service comes through a gateway that combines a modem and a router, check the maker's manual for bridge mode before you add a second router. Gather an Ethernet cable and the power adapter that came with the router. A router needs a modem to reach the internet, so do not throw the modem away when the new router arrives.

  2. Connect the router to the modem

    Plug one end of the Ethernet cable into the modem and the other end into the router's WAN or internet port. The WAN port is often set apart from the other ports and marked as internet or WAN. Leave the other Ethernet ports free for wired devices such as a computer or a streaming player. Do not plug the modem cable into a LAN port, since the router will not reach the internet from there.

  3. Power on the modem, then the router

    Plug the modem into power first and wait until its lights settle and show a connection. Then plug the router into power and wait for its lights to show it is ready. Powering the modem first lets the router get its address from the service when it starts. If the lights stay off or keep blinking, check the power adapter and the cable, then restart both in the same order.

  4. Set the network and password

    Open the maker's app or the setup page the manual points to and follow the guided setup. Choose a network name you will recognize and set a password you can remember, then save the settings and let the router restart. Some routers let you set up separate settings for the 2.4 GHz and 5 GHz bands, so check the settings if you want them apart. Write the password down and keep it where you can find it.

  5. Place the router for coverage

    Put the router in a central spot, out in the open and raised above the floor, so the signal reaches more rooms. Keep it away from thick walls, metal objects, and other electronics that crowd the same shelf. A mesh system spreads the signal through extra units placed around the home, so follow the app's guidance on where each unit goes. Move the router a short distance and check the signal in the rooms you use most.

  6. Connect your devices and check

    Join the new network from your phone, laptop, or TV using the name and password you set. Open a web page or stream a video to confirm the connection works. If a device will not join, forget the old network name on that device and try again with the new password. Reconnect smart home devices one at a time, since each one stores the old network name until you change it.

What you need

TP-Link Deco X55 AX3000

TP-Link Deco X55 AX3000

A Wi-Fi 6 mesh system with 3 Gigabit ports on each unit and Ethernet backhaul, covering up to 6500 square feet with the Deco app for setup.

View on Amazon
Amazon eero 6 mesh

Amazon eero 6 mesh

A Wi-Fi 6 router that covers up to 1,500 square feet, supports plans up to 900 Mbps, and sets up through the eero app.

View on Amazon
TP-Link AX1800 WiFi 6 Router

TP-Link AX1800 WiFi 6 Router

A dual-band Wi-Fi 6 router with AX1800 speed class, gigabit ports, and Easy Mesh, set up through the Tether app with Alexa support.

View on Amazon
NETGEAR Nighthawk

NETGEAR Nighthawk

A dual-band Wi-Fi 6 router with AX1800 speed class, four Gigabit LAN ports and a WAN port, set up through the Nighthawk app.

View on Amazon

These come from our ranked list Best Wi-Fi Router, which compares them spec by spec.

FAQ

Do I need a modem with a new router?

Yes, a router needs a modem to reach the internet, unless your service comes through a gateway that already has one built in. The router connects to the modem with an Ethernet cable, and the modem connects to the line from your service provider. Check your service manual if you are not sure which box you have.

Why is my new router offline?

Check that the Ethernet cable runs from the modem to the router's WAN or internet port, and that the modem's lights show a connection. Power the modem off and on, wait for its lights to settle, then power the router off and on. If the lights still show no connection, contact your internet service provider and ask whether the line is active.

Can I use the old network name and password?

Yes, you can give the new router the same network name and password, and your devices will join it as before. Set the same name and password during guided setup, then restart the router. If a device still will not join, forget the network on that device and join it again with the same password.

Ranked routers guides