How to Connect a New Router to a Computer
Plug an Ethernet cable from your modem into the WAN port on the new router, then plug your computer into a LAN port with another Ethernet cable. Power the router on and wait for its lights to settle, then open the router app and follow the steps to name the network and set a password. A wired connection works as soon as the cables are in place.
Unplug the modem and place the router
Start with the modem off and unplugged, then set the new router where the modem cable reaches it and where the signal can spread. Keep the router out in the open, not inside a closed cabinet, and away from thick walls and large metal objects. Plug the modem back in first and wait for its lights to settle before you connect the router.
Connect the modem to the router
Take an Ethernet cable and plug one end into the modem and the other end into the WAN port on the new router. The WAN port sits apart from the LAN ports, and on the NETGEAR Nighthawk it is a separate 1 Gig port. If the modem and router are a modem router combo from your provider, check the provider's notes for bridge mode before you plug the new router in.
Connect the computer with a cable
Plug another Ethernet cable into any LAN port on the router and into the Ethernet port on the computer. The Deco X55 has 3 Gigabit Ethernet ports on each unit, and the NETGEAR Nighthawk has four 1 Gig LAN ports, so there is room for more wired devices. A wired connection reaches the router's setup page without Wi-Fi.
Run the setup app and set a password
Open the router's app on your phone or a browser on the computer and follow the setup steps. The Deco app, the eero app and the Nighthawk app all walk you through setup with on-screen guidance. Name the network, set a strong password, and check for a firmware update when the app offers one. Then connect your other devices to the new network name.
What you need

TP-Link Deco X55 AX3000
A Wi-Fi 6 mesh system of 3 units that covers up to 6500 square feet, with 3 Gigabit Ethernet ports on each unit and Ethernet backhaul.
View on Amazon
Amazon eero 6 mesh
A Wi-Fi 6 mesh router that covers up to 1,500 sq. ft. and supports speeds up to 900 Mbps, with setup through the eero app.
View on Amazon
TP-Link AX1800 WiFi 6 Router
A Wi-Fi 6 dual-band router with AX1800 speed class, 1.8 Gbps total bandwidth, Gigabit ports and Easy Mesh.
View on Amazon
NETGEAR Nighthawk
A Wi-Fi 6 dual-band router with 1.8 Gbps speeds, four 1 Gig LAN ports and a separate 1 Gig WAN port for the modem.
View on AmazonThese come from our ranked list Best Wi-Fi Router, which compares them spec by spec.
FAQ
Do I need a modem to connect a new router?
Yes, for most internet service providers. The Deco X55 works with all internet service providers but a modem is required for most of them, and the Archer AX21 also requires a separate modem. Plug the modem into the router's WAN port first.
Can I connect my computer to the router with Wi-Fi instead of a cable?
Yes. Once the router is powered on and set up, the computer finds the new network name and connects with the password you set. A cable connection opens the setup page without Wi-Fi.
Why does my new router stay offline after setup?
Check the cable between the modem and the router's WAN port, then restart the modem and the router. If the modem is a combined modem router box, it may need bridge mode. Contact your internet provider if the modem itself shows no connection.




