How to Connect Mesh WiFi to a Router
Plug the main mesh unit into your modem or your router with an Ethernet cable, then set it up in its app. The main unit becomes the first point of your mesh network, and the other units connect to it by Wi-Fi or by Ethernet cable. If you keep your router, put the mesh in bridge or access-point mode so only one device hands out addresses on your network.
Connect the main unit first
Start with the unit that will sit next to your modem or router. Plug one end of an Ethernet cable into the modem or into a LAN port on your router, and the other end into the main mesh unit, then plug the unit into power. Wait for its light to settle, then open the setup app and follow the steps to name your network and set a password. The main unit is the one that talks to the internet, so place it where its cable reaches the modem or router without stretching across a walkway.
Choose router mode or bridge mode
Decide whether the mesh replaces your router or works behind it. If the mesh replaces the router, plug the main unit straight into the modem and let the mesh hand out addresses. If you keep your router, set the mesh to bridge or access-point mode in its app so the router keeps handing out addresses and you avoid two devices doing the same job. A mesh left in router mode behind another router can give devices on different parts of the network trouble reaching each other.
Place the other units
Put each extra unit about halfway between the main unit and the far room you want to cover, in the open and off the floor. Thick walls and floors weaken the signal between units, so a unit hidden in a cabinet or behind a television links poorly. Each Deco S4 unit has 2 Gbps Ethernet ports, and the eero 7 has two auto-sensing 2.5 GbE ports, so you can also link a unit back to the main unit with a cable where a cable run is practical. Check the app after each unit joins to confirm it shows as connected.
Give the network one name
Use a single network name and password across all the units so your phone and laptop move between them without you switching networks by hand. The Deco S4 keeps one network name and password across its units, and its devices switch between units as you move through your home. After the units are placed, walk through your rooms with a phone and confirm the signal holds in the far rooms before you move any unit again.
What you need

TP-Link Deco S4 Mesh AC1900
A 3-pack Deco S4 mesh system with Wi-Fi 5, AC1900 dual-band speeds and 2 Gbps Ethernet ports, covering up to 5,500 sq. ft. with a 2-year warranty.
View on Amazon
TP-Link Deco S4 Whole Home Mesh
A 2-pack Deco S4 mesh system with Wi-Fi 5, AC1900 dual-band speeds and 2 Gbps Ethernet ports, covering up to 3,800 sq. ft. with a 2-year warranty.
View on Amazon
Amazon eero 7 dual-band mesh
A 2-pack eero 7 dual-band Wi-Fi 7 router for internet plans up to 2.5 Gbps, covering up to 4,000 sq. ft. and 120+ devices, with a three-year warranty.
View on Amazon
Amazon eero 7 dual-band mesh
A 3-pack eero 7 dual-band Wi-Fi 7 router for internet plans up to 2.5 Gbps, covering up to 6,000 sq. ft. and 120+ devices, with a three-year warranty.
View on AmazonThese come from our ranked list Best Mesh Router, which compares them spec by spec.
FAQ
Can a mesh system replace my router?
Yes. The Deco S4 replaces a Wi-Fi router and extender, and the eero 7 is a router, so either can sit between your modem and your devices. Plug the main unit into the modem, set it up, and let it hand out addresses on your network.
Do I still need my modem?
Yes. A modem is required for most ISPs, and the mesh plugs into it. The mesh spreads the Wi-Fi signal through your home, but the modem is the device that connects your home to your internet provider.
Can I add more units later?
Yes. The eero 7 is backward compatible with all previous generations of eero, so older eero units can join the same network. For the Deco S4, add another Deco unit and set it up in the Deco app.



