How to Connect an Ethernet Cable from Router to PC
Plug one end of an Ethernet cable into a LAN port on the router and the other end into the Ethernet port on the PC. The PC then joins the router's network over the cable, so pages load and files move without Wi-Fi.
Find the LAN ports on the router
Look at the back of the router for ports marked LAN. The WAN port is for the modem, so leave it alone and use a LAN port for the PC. The Nighthawk R6700AX has four 1 Gig Ethernet LAN ports plus a separate 1 Gig WAN port, and each Deco X55 unit has 3 Gigabit Ethernet ports.
Plug the cable into the router and the PC
Push one end of the Ethernet cable into a LAN port on the router until it clicks, then push the other end into the Ethernet port on the PC until it clicks. Keep the cable clear of chair legs and doorways so it does not get pulled loose. A cable that does not click in may have a broken clip, so try another cable.
Check the wired connection on the PC
The PC should show a wired or Ethernet connection once the cable is in. Open a page in the browser to confirm the PC reaches the internet through the cable. If nothing loads, try another LAN port on the router, check that both ends click in, and restart the PC and the router.
Add more wired devices
Use the spare LAN ports for other devices, such as a second PC, a console or a streaming player. The Nighthawk has four LAN ports, and each Deco X55 unit has 3 Gigabit ports, so a mesh setup has ports on every unit. The Deco X55 also supports wired Ethernet backhaul between its units.
What you need

TP-Link Deco X55 AX3000
A Wi-Fi 6 mesh system with 3 Gigabit Ethernet ports per unit and support for wired Ethernet backhaul.
View on Amazon
Amazon eero 6 mesh
A Wi-Fi 6 mesh router that supports internet plans up to 900 Mbps and covers up to 1,500 sq. ft.
View on Amazon
TP-Link AX1800 WiFi 6 Router
A dual-band Wi-Fi 6 router with AX1800 speeds, four high-gain antennas and a 2-year warranty.
View on Amazon
NETGEAR Nighthawk
A Wi-Fi 6 router with four 1 Gig Ethernet LAN ports and a separate 1 Gig WAN port for the modem.
View on AmazonThese come from our ranked list Best Wi-Fi Router, which compares them spec by spec.
FAQ
Which router port does the PC plug into?
A LAN port. The WAN port is for the modem, so use a LAN port for the PC.
Does the cable need a driver or setup?
No. The PC detects the wired connection once the cable is plugged into a LAN port and the PC's Ethernet port.
Can I connect more than one PC with a cable?
Yes, if the router has spare LAN ports. The Nighthawk has four LAN ports and each Deco X55 unit has three Gigabit ports.




