How to Connect a Coaxial Cable to a Router
The coaxial cable plugs into the modem, not the router. The modem connects to the router's WAN port with an Ethernet cable, and the router sends out the Wi-Fi. A modem is required for most providers, and every WiFi router needs a separate modem, so the coax, the modem and the router form one chain from the wall outlet to your Wi-Fi.
Plug the coax into the modem
Find the coax outlet on the wall and the coax port on the modem, then screw the cable onto the modem's port until it is finger-tight. The coax carries the signal from your provider into the modem, which turns it into a connection the router can use. Do not force the connector, and check that the cable sits straight on the port before you tighten it.
Connect the modem to the router
Run an Ethernet cable from the modem's Ethernet port to the WAN port on the router. The NETGEAR Nighthawk has a separate 1 Gig WAN port for the modem, and each Deco X55 unit has 3 Gigabit Ethernet ports and can work as the router. Plug the modem into power first, then the router, and follow the setup steps in the router's app.
When the modem and router are one box
Some homes have a gateway, a single box that holds the modem and the router together. With a gateway, the coax plugs straight into the box, and there is no separate modem or Ethernet link to add. Some gateways and modem router combos may need bridge mode, so check the gateway's manual before you add a separate router to it.
If the connection does not come up
Check that the coax is tight at the wall outlet and at the modem, and that the Ethernet cable sits fully in the modem and in the router's WAN port. If the modem's lights show no connection, unplug the modem, wait for it to restart, then restart the router. If it still does not connect, contact your internet provider, since the fault may sit on their line.
What you need

TP-Link Deco X55 AX3000
A Wi-Fi 6 mesh system with 3 Gigabit Ethernet ports per unit and support for Ethernet backhaul, covering up to 6500 sq ft.
View on Amazon
Amazon eero 6 mesh
A Wi-Fi 6 mesh router covering up to 1,500 sq ft and connecting 75+ devices, set up through the eero app.
View on Amazon
TP-Link AX1800 WiFi 6 Router
A dual-band Wi-Fi 6 router with AX1800 speed class, 1.8 Gbps total bandwidth and Easy Mesh support, working with Alexa.
View on Amazon
NETGEAR Nighthawk
A dual-band Wi-Fi 6 router with 4 Gigabit LAN ports and a separate WAN port that connects to a modem with Ethernet.
View on AmazonThese come from our ranked list Best Wi-Fi Router, which compares them spec by spec.
FAQ
Can I plug a coaxial cable straight into my router?
No. Plug the coax into the modem, then run an Ethernet cable from the modem to the router's WAN port.
What if my modem and router are one device?
Then it is a gateway, and the coax plugs straight into it. Some gateways need bridge mode when you add a separate router, so check the gateway's manual.
Do I need a modem if I have a router?
Yes, for most internet service providers. A modem is required for most providers, and every WiFi router needs a separate modem.




