How to Connect a Mesh Wi-Fi System
To connect a mesh Wi-Fi system, plug the main node into your modem with an Ethernet cable, power it on, and set up the network in the maker's app. Then power on each satellite node and add it in the app. The nodes link to each other and broadcast one network name, so your devices move between them as you walk through your home.
Connect the main node to your modem
Find the node marked as the main unit and place it near your modem. Run an Ethernet cable from a LAN port on the modem to the Ethernet port on the node, then plug the node into power. Wait for its light to show it is ready, which the app or the maker's guide describes. If your modem has built-in Wi-Fi, turn that off so your devices join the mesh network instead.
Set up the network in the app
Download the app for your system, such as the Deco app, and create an account if the app asks for one. Follow the prompts to name your network and set a password. The app finds the main node and checks for a connection to the internet. Keep the phone near the node while it sets up, and do not unplug the node until the app says setup is done.
Add each satellite node
Place a satellite node in the room where you want better coverage and plug it into power. Open the app and choose the option to add a node. The app looks for the new node and adds it to the same network, so you do not need a new network name or password for it. Repeat this for each node in the pack, one at a time, and wait for the app to confirm each one before moving on.
Place nodes where the signal stays strong
Put each node out in the open, on a shelf or table, about halfway between the main node and the room with weak signal. Keep nodes away from thick walls, large metal objects and the floor, and do not hide them inside a cabinet. If the app shows a weak link between two nodes, move the satellite closer to the main node and check again.
Join the network and check each room
Connect your phone, laptop and other devices to the new network name with the password you set. Walk through the rooms and check that pages load and video plays without long pauses. If one room still drops, move its node a little closer to the main node or try a different spot in the same room. You can also wire a node to the main node with an Ethernet cable for a steadier link.
What you need

TP-Link Deco S4 Mesh AC1900
A 3-pack Deco S4 with Wi-Fi 5, AC1900 speeds and coverage up to 5,500 sq. ft., with two Gigabit Ethernet ports on each unit.
View on Amazon
TP-Link Deco S4 Whole Home Mesh
A 2-pack Deco S4 with Wi-Fi 5 and AC1900 speeds, covering up to 3,800 sq. ft. with a single network name and parental controls.
View on Amazon
Amazon eero 7 dual-band mesh
A 2-pack eero 7 with Wi-Fi 7, two 2.5 GbE ports and coverage up to 4,000 sq. ft., supporting 120+ devices.
View on Amazon
Amazon eero 7 dual-band mesh
A 3-pack eero 7 with Wi-Fi 7, two 2.5 GbE ports and coverage up to 6,000 sq. ft., supporting 120+ devices.
View on AmazonThese come from our ranked list Best Mesh Router, which compares them spec by spec.
FAQ
Do mesh nodes need an Ethernet cable?
No. The nodes link to each other over Wi-Fi, so you only need a cable between the modem and the main node. You can still wire a satellite node to the main node with an Ethernet cable if you want a steadier link between them.
Can I use a mesh system with my modem?
Yes. Plug the main node into your modem with an Ethernet cable. A modem is required for most internet providers, so check that yours is set up and online before you start.
How many mesh nodes do I need?
Match the pack to your home. A 2-pack Deco S4 covers up to 3,800 sq. ft. and the 3-pack up to 5,500 sq. ft., while a 2-pack eero 7 covers up to 4,000 sq. ft. and the 3-pack up to 6,000 sq. ft. Add a node when rooms far from the main node still have weak signal.



