How to Connect Two WiFi Routers
Connect the second router to the first router with an Ethernet cable, then set the second router to access point mode so the two act as one network. The cable runs from a LAN port on the first router to the second router, and the second router stops handing out network addresses. Your devices then move between the two routers on one SSID.
Pick the layout first
Decide what the second router should do before you plug anything in. In access point mode the second router extends the first router's network, so devices share one SSID and move between the two routers. In router mode the second router makes its own separate network with its own SSID, which suits a guest network or a separate area. For wider coverage, start with access point mode unless you have a reason to keep the networks apart.
Run a cable between the routers
Place the second router where the signal is weak, near a power outlet, and run an Ethernet cable from a LAN port on the first router to the second router. A cable link keeps the second router fed with a steady connection instead of repeating a weak wireless signal. If the second router will run in access point mode, plug the cable into one of its LAN ports. If it will run as its own router, plug the cable into its WAN port instead.
Turn off DHCP on the second router
Open the second router's settings in a browser or its app, and find the DHCP setting. Turn DHCP off on the second router so only the first router hands out network addresses, and give the second router an address on the first router's network so you can still reach its settings. Save the change and let the router restart. If the second router has an access point mode, turning that mode on handles these settings for you.
Use the same SSID
Give both routers the same SSID, the network name your devices see, and password if you want devices to move between them without you switching networks by hand. Use the 2.4 GHz band for range and the 5 GHz band close to the router, and keep the same SSID on both bands if the routers allow it. If you would rather pick the router yourself each time, give the second router a different SSID so you can see which one you join.
Restart and check the connection
Restart both routers, then stand near the second router with a phone or laptop and join the network. Open a web page to confirm the connection works, then walk toward the first router and check the page still loads as the device moves between routers. If a device clings to the weaker router, turn its Wi-Fi off and on again so it joins the closer one.
What you need

TP-Link Deco X55 AX3000
A Wi-Fi 6 mesh system in a 3-pack with 3 Gigabit ports per unit and Ethernet backhaul, covering up to 6500 square feet.
View on Amazon
Amazon eero 6 mesh
A Wi-Fi 6 mesh router covering up to 1,500 square feet, connecting 75 or more devices, with a built-in Zigbee smart home hub.
View on Amazon
TP-Link AX1800 WiFi 6 Router
A dual-band Wi-Fi 6 router with AX1800 speed class, Easy Mesh support and 4 high-gain antennas with Beamforming.
View on Amazon
NETGEAR Nighthawk
A dual-band Wi-Fi 6 router with 4 Gigabit LAN ports, covering up to 1,500 square feet for up to 20 connected devices.
View on AmazonThese come from our ranked list Best Wi-Fi Router, which compares them spec by spec.
FAQ
Do the two routers need the same brand?
No. Any two routers can link by Ethernet cable, and access point mode works across brands. Match the SSID and password, and let the first router handle network addresses.
Can I connect two routers without a cable?
Some routers can link over Wi-Fi as a repeater or through a mesh system, but a cable link is steadier and avoids repeating a weak wireless signal.
Why does my device stay on the weak router?
Devices pick a router and hold on until the signal drops. Turn Wi-Fi off and on again on the device so it joins the closer router, or give the routers the same SSID so the move happens on its own.




