How to Connect Two Wi-Fi Routers on One Network
Connect the second router to the first with an Ethernet cable, turn off the second router's DHCP server, and give both routers the same Wi-Fi name and password so devices see one network. If both routers support mesh, add the second as a mesh node in the app instead of wiring it by hand.
Pick the link between the routers
Two routers can join in two ways. A cable between them gives the steadiest link: run Ethernet from a LAN port on the first router to a LAN port on the second. A mesh pair joins over Wi-Fi instead, which suits rooms where you cannot run a cable. Check whether both of your routers support mesh before you try that route. Choose the cable when you can run one, and choose mesh when the second router must sit far from the first.
Wire the second router to the first
Plug one end of an Ethernet cable into a LAN port on the first router and the other end into a LAN port on the second router. Do not use the second router's WAN or internet port for this link, since that port would create a second network instead of joining the first. The first router stays connected to the modem and keeps handing out addresses, while the second router passes traffic through to it.
Turn off the second router's DHCP server
Only one router on a network should hand out addresses. Open the second router's settings, find its DHCP server setting, and turn it off, then save and restart the router. Give the second router a fixed address on the first router's network so you can still open its settings later, and pick one the first router does not hand out to other devices. If you skip this step, devices may get conflicting addresses and lose the connection.
Set the Wi-Fi name and password
Open the second router's wireless settings and set the same network name and password as the first router, on both the 2.4 GHz and 5 GHz bands, so devices treat them as one network. Devices then pick the stronger signal as you move through the house. If you would rather choose by hand, give the second router a different name so you can pick it from the Wi-Fi list.
Place the second router and check the signal
Put the second router where the first router's signal is weak but still reaches, such as the far end of the house or upstairs, and plug it in. Walk through the house with a phone or laptop and check that it stays online as it moves from one router to the other. If the signal drops between them, move the second router closer to the first and check again.
What you need

TP-Link Deco X55 AX3000
A Wi-Fi 6 mesh system with AX3000 speed class, three Gigabit ports per unit, Ethernet backhaul and coverage up to 6500 sq. ft. in the 3-pack.
View on Amazon
Amazon eero 6 mesh
A Wi-Fi 6 mesh router that covers up to 1,500 sq. ft., supports internet plans up to 900 Mbps and connects 75+ devices.
View on Amazon
TP-Link AX1800 WiFi 6 Router
A dual-band Wi-Fi 6 router with AX1800 speed class, Gigabit ports and Easy Mesh support for adding a second node.
View on Amazon
NETGEAR Nighthawk
A dual-band Wi-Fi 6 router with AX1800 speed class, 4 Gigabit LAN ports, coverage up to 1,500 sq. ft. and 20 connected devices.
View on AmazonThese come from our ranked list Best Wi-Fi Router, which compares them spec by spec.
FAQ
Can I use the same Wi-Fi name on both routers?
Yes. Set the same network name and password on both routers, on the 2.4 GHz and 5 GHz bands, and devices will treat them as one network and pick the stronger signal.
Do the two routers need a cable between them?
No, if both routers support mesh they can join over Wi-Fi, but a cable between their LAN ports gives the steadiest link and leaves the Wi-Fi bands free for your devices.
Why does the second router need DHCP turned off?
Two DHCP servers hand out conflicting addresses, so devices can lose the connection. Keep DHCP on the first router only and let the second router pass traffic through to it.




