How to Build a Home Computer Network
To build a home computer network, connect a router to your modem, place the router where its Wi-Fi reaches the rooms you use, and add mesh units or wired connections where the signal is weak. A mesh system covers a larger home, while a single router covers a smaller home. Use the Deco app, the eero app or the Nighthawk app to set up the network.
Start with the modem and the router
A router needs a modem for most internet service providers, and the Deco X55 and the Archer AX21 both state that a separate modem is required. Connect the router to the modem with an Ethernet cable, then plug the router in and open its app. The Deco app helps you set up with clear visual guidance, the eero app walks you through setup, and the Nighthawk app offers guided setup. Check the requirements published for your internet plan before you choose a router.
Place the router for coverage
Place the router in a central spot, in the open, where its Wi-Fi reaches the rooms you use. The Deco X55 3-pack covers up to 6500 sq ft, while the eero 6 and the NETGEAR Nighthawk each cover up to 1500 sq ft. The Archer AX21 uses Beamforming with 4 high-gain antennas to focus signal strength toward your devices. If a room still has a weak signal, add a mesh unit or a wired connection there.
Connect devices by wire and by Wi-Fi
Connect computers, consoles, streaming players and storage drives by wire where you can, and use Wi-Fi for phones, laptops and TVs. Each Deco X55 unit has 3 Gigabit Ethernet ports and supports wired Ethernet backhaul. The NETGEAR Nighthawk has 4 Gigabit LAN ports and a separate WAN port for the modem. The Deco X55 connects up to 150 devices, the eero 6 connects 75+ devices, and the NETGEAR Nighthawk covers up to 20 devices.
Name the network and add a guest network
Give the network a name and a password in the router app, and write the password down where you can find it. The NETGEAR Nighthawk app lets you set up a guest network, pause devices and manage Wi-Fi from anywhere. The eero app lets you manage your network from anywhere, and the Deco app keeps you in control even when you are not home. Check the app for your router for the settings it lists.
What you need

TP-Link Deco X55 AX3000
A 3-pack Wi-Fi 6 AX3000 mesh system that covers up to 6500 sq ft, with 3 Gigabit ports per unit and Ethernet backhaul.
View on Amazon
Amazon eero 6 mesh
A 1-pack Wi-Fi 6 router that covers up to 1500 sq ft, connects 75+ devices and has a built-in Zigbee smart home hub.
View on Amazon
TP-Link AX1800 WiFi 6 Router
A dual-band Wi-Fi 6 AX1800 router with 4 high-gain antennas, Beamforming and a 2-year warranty.
View on Amazon
NETGEAR Nighthawk
A dual-band Wi-Fi 6 AX1800 router that covers up to 1500 sq ft for up to 20 devices, with 4 Gigabit LAN ports.
View on AmazonThese come from our ranked list Best Wi-Fi Router, which compares them spec by spec.
FAQ
Do I need a modem for a home network?
Yes, for most internet service providers. The Deco X55 and the Archer AX21 both state that a separate modem is required, and the NETGEAR Nighthawk pairs with your existing modem or gateway through Ethernet.
Should I choose a mesh system or a single router?
Choose a mesh system for a larger home and a single router for a smaller home. The Deco X55 3-pack covers up to 6500 sq ft, while the eero 6 and the NETGEAR Nighthawk each cover up to 1500 sq ft.
How many devices can these routers connect?
The Deco X55 connects up to 150 devices, the eero 6 connects 75+ devices, and the NETGEAR Nighthawk covers up to 20 devices. Count the phones, laptops, TVs and smart home devices in your home before you choose.


