How to Set Up a Second Router
To set up a second router, connect it to your main router with an Ethernet cable and run it in access point mode, with DHCP turned off, so it extends the same network instead of creating a second one. Place it where the signal is weak, give it the same Wi-Fi name and password, then check that your devices move between the two routers without dropping the connection.
Decide what the second router should do
A second router can extend your network or run a separate one. Access point mode is the usual choice for a home: the second router passes traffic to the main router, and devices see one network. A separate network suits a guest area or a room you want kept apart, but devices on it cannot reach printers and shared drives on the main network. Decide before you plug anything in, because the choice sets how you wire it and which settings you change.
Connect the two routers with a cable
Run an Ethernet cable from a LAN port on the main router to the second router. A wired link keeps the connection stable, while a wireless link repeats a signal that is already weak. Put the second router where the signal drops, such as the far end of the house or an upstairs room, within reach of the cable. If the cable run is long, route it along a wall or through a cable clip so it stays out of the way.
Turn off DHCP and set access point mode
Log in to the second router's admin page from a browser and look for access point mode, sometimes listed as AP mode or bridge mode. Turning it on switches off the router's DHCP server, so the main router hands out addresses and there is only one network. As a second route, turn off DHCP by hand in the LAN settings and give the router an address on the same network as the main router. Save the settings and let the router restart.
Set the Wi-Fi name and password
Give the second router the same Wi-Fi name and password as the main router so your devices treat the two as one network and move between them. Use the same security type on both, and set the same name on the 2.4 GHz and 5 GHz bands if your router shows them separately. If you want to tell the two apart while you check the setup, add a short suffix to the second router's name, then change it back to match once everything works.
Check the connection and walk around
Stand next to the second router and join its network, then open a page or a video to confirm the connection works. Walk back toward the main router and watch whether your phone or laptop stays online as it moves between the two. If a device clings to a weak signal, turn its Wi-Fi off and on so it picks the stronger one. Restart both routers if devices lose the connection, and check the cable is seated in the right ports.
What you need

TP-Link Deco X55 AX3000
A Wi-Fi 6 mesh system with 3 Gigabit ports per unit and Ethernet backhaul, listed to cover up to 6500 sq. ft. and connect up to 150 devices.
View on Amazon
Amazon eero 6 mesh
A Wi-Fi 6 router that covers up to 1,500 sq. ft., supports speeds up to 900 Mbps and connects 75+ devices, with a built-in Zigbee smart home hub.
View on Amazon
TP-Link AX1800 WiFi 6 Router
A dual-band Wi-Fi 6 router with AX1800 speed class, four high-gain antennas, Beamforming and a 2-year manufacturer warranty.
View on Amazon
NETGEAR Nighthawk
A dual-band Wi-Fi 6 router with AX1800 speed class, four Gigabit LAN ports, coverage up to 1,500 sq. ft. and a 1-year limited warranty.
View on AmazonThese come from our ranked list Best Wi-Fi Router, which compares them spec by spec.
FAQ
Do I need a second router or a mesh system?
A mesh system is built to work as one network, so its units hand devices between each other without extra settings. A second router can do the same job in access point mode, but you set it up by hand and run a cable between the two.
Can I use a second router without a cable?
Many routers offer a wireless repeater or extender mode that links to the main router over Wi-Fi. It works where running a cable is not practical, but the second router repeats a signal that may already be weak, so a wired link gives a steadier result.
Why does my phone stay on the weak signal?
Devices hold on to the router they joined first until its signal drops too low to use. Walk closer to the second router, or turn your Wi-Fi off and on, and the device should pick the stronger signal. If it keeps happening, check that both routers share the same Wi-Fi name and password.




