Amazon Black Friday Week deals

Paid link

Routers · How-to guide

How to Install a WiFi Extender

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

Plug a WiFi extender into an outlet between your router and the room with weak Wi-Fi, then connect it to your network through its app or setup page. The extender repeats the router signal into the dead zone. Pick a spot where the router signal is still strong, then check the connection in the weak room after setup.

  1. Pick a spot between the router and the dead zone

    An extender repeats the signal it receives, so it needs a spot where the router signal is still strong. Plug it into an outlet about halfway between the router and the room with weak Wi-Fi, not inside the dead zone itself. Keep it out in the open, away from thick walls, large metal objects and appliances that weaken the signal.

  2. Plug it in and wait for it to start

    Plug the extender into the outlet and wait for its lights to settle. The signal light shows how strong the router signal is at that spot. If it shows a weak signal, move the extender closer to the router and try again.

  3. Connect the extender to your Wi-Fi network

    Open the extender's app or setup page on your phone or laptop and follow the prompts to join your network. Enter the same network name and password your router uses, so your devices can move between the router and the extender. When the setup finishes, the extender broadcasts the network into the weak room.

  4. Check the connection in the weak room

    Walk to the room that had weak Wi-Fi and open a video or a page on your phone. If it loads well, the spot works. If it still buffers, move the extender a little closer to the router and check again. A spot with a stronger router signal gives the extender more to repeat.

What you need

TP-Link Deco X55 AX3000

TP-Link Deco X55 AX3000

A Wi-Fi 6 mesh system in a 3-pack that covers up to 6500 sq. ft., with 3 Gigabit ports per unit and support for Ethernet backhaul.

View on Amazon
Amazon eero 6 mesh

Amazon eero 6 mesh

A Wi-Fi 6 mesh router that covers up to 1,500 sq. ft. and connects 75+ devices, with app-guided setup.

View on Amazon
TP-Link AX1800 WiFi 6 Router

TP-Link AX1800 WiFi 6 Router

A Wi-Fi 6 dual-band router with AX1800 speed class, 4 high-gain antennas and Easy Mesh support.

View on Amazon
NETGEAR Nighthawk

NETGEAR Nighthawk

A Wi-Fi 6 router with AX1800 speed class, coverage up to 1,500 sq. ft. for up to 20 devices and 4 Gigabit LAN ports.

View on Amazon

These come from our ranked list Best Wi-Fi Router, which compares them spec by spec.

FAQ

Where should I plug in a WiFi extender?

Halfway between the router and the weak room, in a spot where the router signal is still strong. An extender placed inside the dead zone repeats only the weak signal it receives there, so move it closer to the router if the connection stays weak.

Do I need a new password for the extender?

Set the extender to the same network name and password as the router, and devices can move between the two without new logins. The setup screen shows the network name the extender will broadcast.

Why is my extender slow after setup?

The extender can only repeat the signal it receives, so a weak signal at the extender means a weak signal in the room. Move the extender closer to the router, and keep it clear of thick walls and large metal objects.

Ranked routers guides