Amazon Black Friday Week deals

Paid link

Routers · How-to guide

How to Connect Two Routers

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

Connect the second router to the first with an Ethernet cable, then set the second router to access point mode so it extends the same network instead of creating a second one. If both routers support mesh, add the second one through the mesh app instead, which keeps one network name and one set of settings. Only the first router hands out addresses and connects to the modem.

  1. Choose how the routers link

    You have two choices. A mesh setup links the routers over Wi-Fi or a cable and keeps one network name, while a wired setup links them with an Ethernet cable and the second router works as an access point. Mesh is simpler when both routers support it and you cannot run a cable. A cable is the better choice when you can run one, since the link between the routers does not use Wi-Fi at all.

  2. Link the routers with a cable

    Plug one end of an Ethernet cable into a LAN port on the first router, the one connected to your modem. Plug the other end into the second router: into its WAN port if it will run as its own router, or into a LAN port if you will switch it to access point mode. Place the second router where coverage is weak, close enough that the cable reaches without pulling tight.

  3. Switch the second router to access point mode

    Open the second router's settings in a browser on a device connected to it, using the address in its manual. Find the operation mode or DHCP setting, switch it to access point mode, and turn off its DHCP server so only the first router hands out addresses. Save the change and let the second router restart, then check that devices connected to it reach the internet.

  4. Set up Wi-Fi and check the connection

    Give the second router the same Wi-Fi name and password as the first if you want devices to move between them without joining a new network, or use a different name if you want to choose which router you join. Walk to the far end of the home with a phone or laptop and check that pages load and video plays. If the signal drops, move the second router closer to the first and check again.

What you need

TP-Link Deco X55 AX3000

TP-Link Deco X55 AX3000

A Wi-Fi 6 mesh system with 3 Gigabit ports per unit and Ethernet backhaul, so the second unit links to the first over a cable instead of Wi-Fi.

View on Amazon
Amazon eero 6 mesh

Amazon eero 6 mesh

A Wi-Fi 6 mesh router that covers up to 1,500 sq. ft. and supports 75+ connected devices, with app-guided setup for adding a second unit.

View on Amazon
TP-Link AX1800 WiFi 6 Router

TP-Link AX1800 WiFi 6 Router

A dual-band Wi-Fi 6 router with Easy Mesh, so it can join a mesh network as the second router instead of running its own network.

View on Amazon
NETGEAR Nighthawk

NETGEAR Nighthawk

A dual-band Wi-Fi 6 router with 4 Gigabit LAN ports and a separate WAN port, so an Ethernet cable can link it to the first router.

View on Amazon

These come from our ranked list Best Wi-Fi Router, which compares them spec by spec.

FAQ

Do I need an Ethernet cable to connect two routers?

No, if both routers support mesh you can link them over Wi-Fi through the mesh app. A cable gives a steadier link between the two routers, so use one when you can run it between the rooms.

Should both routers use the same Wi-Fi name?

With a mesh system, yes: the app keeps one name across both units. With a cabled second router in access point mode, one shared network lets devices move between them, while separate networks let you pick which router you join.

Why does my second router create a separate network?

It is still acting as a router, handing out its own addresses with its own network name. Switch it to access point mode and turn off its DHCP server so the first router handles addresses for the whole home.

Ranked routers guides