Amazon Black Friday Week deals

Paid link

Routers · How-to guide

How to Connect an Ethernet Cable to a Router

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

Plug one end of the Ethernet cable into a LAN port on the router and the other end into your computer or other device. The cable clicks into place, and the router lights show the link is live. If the router is new, connect its WAN port to the modem first, since the router shares the modem connection with everything plugged into it.

  1. Find the ports on your router

    Look at the back of the router for the Ethernet ports. The port marked WAN or Internet takes the cable from the modem, while the ports marked LAN take cables to your devices. The LAN ports often sit together in a row, and the WAN port stands apart from them, sometimes in a different color. Check the labels on your router before you plug anything in.

  2. Connect the modem to the router

    If your router is not set up yet, plug an Ethernet cable from the modem into the WAN port on the router. The modem brings the internet into your home, and the router shares that connection with your devices. A router on its own cannot reach the internet without a modem or gateway, so make this link first and check that both boxes have power.

  3. Plug the cable into a LAN port

    Take the Ethernet cable and push its connector into a free LAN port on the router until it clicks. The clip on the connector holds it in place, so do not force it if it will not go in: turn the connector over and try again. The light next to the port comes on once the cable is seated, which tells you the router sees the link.

  4. Connect the other end to your device

    Plug the other end of the cable into the Ethernet port on your computer, game console, streaming player or other device. Push it in until it clicks, just as you did at the router end. The device should show a wired connection within a few moments, and you can open a web page to check that it loads.

  5. Check the connection and fix problems

    If nothing loads, check both ends of the cable and make sure each connector is fully seated. Try a different LAN port on the router and a different cable if you have one. Restart the modem and the router, then wait for their lights to settle before you try again. If the link still fails, the cable or the port may be at fault.

What you need

TP-Link Deco X55 AX3000

TP-Link Deco X55 AX3000

A Wi-Fi 6 AX3000 mesh system with 3 Gigabit ports per unit and Ethernet backhaul, covering up to 6500 sq ft.

View on Amazon
Amazon eero 6 mesh

Amazon eero 6 mesh

A Wi-Fi 6 mesh router covering up to 1,500 sq ft, with support for internet plans up to 900 Mbps and 75+ devices.

View on Amazon
TP-Link AX1800 WiFi 6 Router

TP-Link AX1800 WiFi 6 Router

A Wi-Fi 6 AX1800 dual-band router with Gigabit ports, Easy Mesh and 4 high-gain antennas.

View on Amazon
NETGEAR Nighthawk

NETGEAR Nighthawk

A Wi-Fi 6 AX1800 router with 4 Gigabit LAN ports and a separate WAN port, covering up to 1,500 sq ft.

View on Amazon

These come from our ranked list Best Wi-Fi Router, which compares them spec by spec.

FAQ

Which port do I plug the Ethernet cable into?

Plug the cable into a LAN port for a computer or other device. The WAN port is only for the cable from the modem, so do not plug a device into it.

Do I need a modem as well as a router?

Yes. The modem brings the internet into your home, and the router shares it with your devices. A router on its own cannot reach the internet without a modem or gateway.

Why is there no internet after I plug the cable in?

Check that both ends of the cable are fully seated and that the modem has power. Restart the modem and the router, then try a different LAN port or another cable.

Ranked routers guides