Do Mesh Wi-Fi Systems Need Wired Connections?
No. Only the main mesh unit needs a wired connection to your modem. The other units, or nodes, can connect to the main unit over Wi-Fi, so you can place them where you need coverage without running cables. Wiring the nodes to each other with Ethernet, called wired backhaul, gives more stable speeds, and the Deco S4 supports it.
Connect the main unit to the modem
Start with the main unit. Connect it to your modem with an Ethernet cable, since the mesh system needs that one wired link to reach the internet. A modem is required for most ISPs, so check that your internet service includes one or that you have your own. Once the main unit is online, it creates the single network name your devices join.
Place the other nodes wirelessly
The other units do not need a cable. They connect to the main unit over Wi-Fi and extend the same network, so you can put a node in a room with no Ethernet jack. Keep each node close enough to another unit to hold a strong link, and keep it away from thick walls and large metal objects where you can. Your devices use one network name and move between units as you walk through the house.
Wire the nodes for wired backhaul
If you have Ethernet cables run through your home, wire the nodes to the main unit or to each other. Each Deco S4 unit has 2 Gbps Ethernet ports and supports wired backhaul for more stable speeds. Each eero 7 has two auto-sensing 2.5 GbE ports. Wired backhaul frees the Wi-Fi bands for your devices instead of using them to link the nodes, which helps in homes with many devices.
Choose wired or wireless per node
You can mix the two. Wire the nodes that sit near an Ethernet jack and leave the rest wireless, since each node connects the way that suits its spot. Compare the coverage figures when you pick a pack: the Deco S4 3-pack covers up to 5,500 sq. ft., the Deco S4 2-pack covers up to 3,800 sq. ft., the eero 7 2-pack covers up to 4,000 sq. ft., and the eero 7 3-pack covers up to 6,000 sq. ft. Add a node when a room still sits outside the coverage.
What you need

TP-Link Deco S4 Mesh AC1900
A 3-pack Deco S4 system with Wi-Fi 5 AC1900 dual-band speeds, 2 Gbps Ethernet ports per unit, wired backhaul, and coverage up to 5,500 sq. ft.
View on Amazon
TP-Link Deco S4 Whole Home Mesh
A 2-pack Deco S4 system with Wi-Fi 5 AC1900 dual-band speeds, 2 Gbps Ethernet ports per unit, wired backhaul, and coverage up to 3,800 sq. ft.
View on Amazon
Amazon eero 7 dual-band mesh
A 2-pack eero 7 system with Wi-Fi 7 dual-band, two auto-sensing 2.5 GbE ports, support for internet plans up to 2.5 Gbps, and coverage up to 4,000 sq. ft.
View on Amazon
Amazon eero 7 dual-band mesh
A 3-pack eero 7 system with Wi-Fi 7 dual-band, two auto-sensing 2.5 GbE ports, support for internet plans up to 2.5 Gbps, and coverage up to 6,000 sq. ft.
View on AmazonThese come from our ranked list Best Mesh Router, which compares them spec by spec.
FAQ
Do mesh Wi-Fi nodes need an Ethernet cable?
No. The nodes connect to the main unit over Wi-Fi, so only the main unit needs a cable to the modem. You can wire the nodes with Ethernet for wired backhaul when you want more stable speeds.
Can I mix wired and wireless mesh nodes?
Yes. Wire the nodes near an Ethernet jack and leave the others wireless. Each node links to the main unit either way, so you can choose per room.
What is wired backhaul on a mesh system?
Wired backhaul means the mesh nodes talk to each other over Ethernet cables instead of Wi-Fi. The Deco S4 supports wired backhaul for more stable speeds. The eero 7 has two auto-sensing 2.5 GbE ports and supports internet plans up to 2.5 Gbps.



