Do Mesh Wi-Fi Systems Need Ethernet?
No. A mesh Wi-Fi system needs an Ethernet cable only for the main unit, which connects to your modem. The other units connect to the main unit over Wi-Fi and need only a power outlet. Ethernet between units is optional wired backhaul, not a requirement for the system to work.
Connect the main unit to the modem
Place the main mesh unit near your modem and connect the two with an Ethernet cable. Plug the main unit into a power outlet, then follow the maker's setup steps to create your Wi-Fi network name and password. The main unit replaces your old router, so you can unplug the old router once the mesh network is running. Keep the modem in place, since the modem connects your home to your internet service.
Place satellite units on Wi-Fi
Satellite units join the main unit over Wi-Fi, so they need a power outlet and a Wi-Fi signal, not an Ethernet cable. Place each satellite between the main unit and the rooms with weak signal, then check the maker's app or indicator to confirm the unit has a good link. The Deco S4 systems use a single network name and password across units, so your phone or laptop can move between units as you walk through your home.
Use wired backhaul if you have cables
Wired backhaul means the units talk to each other over Ethernet cables instead of Wi-Fi. The Deco S4 3-pack and the Deco S4 2-pack list wired backhaul support and Gigabit Ethernet ports on each unit. If your home has Ethernet cables run between rooms, plug a cable into a satellite unit and follow the maker's guide to switch that unit to wired backhaul. The units also connect over Wi-Fi backhaul, so place each one where it gets a good Wi-Fi signal from another unit.
Plug wired devices into a unit
The Ethernet ports on a mesh unit can also connect a wired device, such as a desktop, smart TV, or game console, in a room far from the modem. The Deco S4 units have Gigabit Ethernet ports, and the eero 7 units have two auto-sensing 2.5 GbE ports. Plug the device into a nearby unit with a short Ethernet cable, and the mesh system carries its traffic back to the main unit.
What you need

TP-Link Deco S4 Mesh AC1900
A 3-pack AC1900 dual-band Wi-Fi 5 mesh system with Gigabit Ethernet ports and wired backhaul support, covering up to 5,500 square feet.
View on Amazon
TP-Link Deco S4 Whole Home Mesh
A 2-pack AC1900 dual-band Wi-Fi 5 mesh system with Gigabit Ethernet ports and wired backhaul support, covering up to 3,800 square feet.
View on Amazon
Amazon eero 7 dual-band mesh
A 2-pack dual-band Wi-Fi 7 mesh system with two auto-sensing 2.5 GbE ports and coverage up to 4,000 square feet.
View on Amazon
Amazon eero 7 dual-band mesh
A 3-pack dual-band Wi-Fi 7 mesh system with two auto-sensing 2.5 GbE ports and coverage up to 6,000 square feet.
View on AmazonThese come from our ranked list Best Mesh Router, which compares them spec by spec.
FAQ
Can satellite mesh units work without Ethernet cables?
Yes. Satellite units connect to the main unit over Wi-Fi and need only a power outlet. Place each satellite where it still gets a good Wi-Fi signal from another unit, and check the maker's app or indicator after you place it.
Does wired backhaul make mesh Wi-Fi faster?
Wired backhaul carries traffic between units over a cable instead of Wi-Fi. The Deco S4 systems list wired backhaul support on their Gigabit Ethernet ports. Check the maker's guide for your model before you run cables between units.
Do I still need a modem with mesh Wi-Fi?
Yes. Connect the main mesh unit to your modem with an Ethernet cable. The mesh system replaces your router, and the modem connects your home to your internet service, so keep the modem plugged in and running.



