Amazon Black Friday Week deals

Paid link

Storage · How-to guide

NVMe Connector Types Explained

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

NVMe drives connect through a connector on the motherboard, and the connector type decides which drive fits. The common NVMe connector is M.2, with a key notch that must match the slot, while some drives use a U.2 cable connector instead. Check the connector and key on your motherboard before you buy, since a drive with the wrong connector will not fit.

  1. What M.2 means

    M.2 is the small slot on a motherboard that takes an NVMe drive, and the drive plugs straight into the slot with no cable. The slot has a key notch, and the drive has a matching notch, so the drive only fits a slot with the same key. M.2 drives use the PCIe interface, and PCIe 4.0 and PCIe 5.0 are two interface versions to check. Check the key and the interface version your motherboard lists before you buy.

  2. M key and B key notches

    The key is the notch cut into the edge of an M.2 drive, and it stops a drive going into a slot it does not fit. An M key notch sits in one place on the edge, and a B key notch sits in another place, so the two keys do not fit the same slot. Some drives carry both notches, so they fit either key. Match the notch on the drive to the notch in the slot on your motherboard, and read the key your motherboard takes in the maker's manual.

  3. NVMe and SATA use different connectors

    NVMe and SATA drives do not use the same connector, even when both are SSDs. SATA drives use a SATA connector and a 2.5-inch bay, such as the PNY 500GB drive, the SanDisk drive and the PNY 250GB drive, which list SATA III and read speeds up to 550MB/s, 545MB/s and 535MB/s. An NVMe drive plugs into an M.2 slot instead, so check the connector your motherboard has before you buy. A 2.5-inch SATA drive will not fit an M.2 slot, and an NVMe drive will not fit a SATA bay.

  4. Check the slot before you buy

    Open the maker's manual for your motherboard or laptop and find the storage slots it lists. Note the connector type, the key and the interface version for each slot, and buy a drive that matches all three. A 2.5-inch SATA drive fits a SATA bay, such as the PNY 500GB drive, the SanDisk drive, the PNY 250GB drive and the Kingston 960GB drive. Shut the device down and unplug it before you fit a drive, and follow the maker's manual for fitting it.

What you need

PNY CS900 500GB 2.5" SATA III Internal

PNY CS900 500GB 2.5" SATA III Internal

A 500GB 2.5-inch SATA III SSD with read speeds up to 550MB/s and a 3-year warranty.

View on Amazon
SanDisk SSD Plus

SanDisk SSD Plus

A 500GB 2.5-inch SATA III SSD with read speeds up to 545MB/s and a 3-year limited warranty.

View on Amazon
PNY CS900 250GB 2.5" SATA III Internal

PNY CS900 250GB 2.5" SATA III Internal

A 250GB 2.5-inch SATA III SSD with read speeds up to 535MB/s and a 3-year warranty.

View on Amazon
Kingston 960GB A400 SATA3 2.5" Internal SSD

Kingston 960GB A400 SATA3 2.5" Internal SSD

A 960GB 2.5-inch SATA3 SSD with a limited 3-year warranty for replacing a hard drive.

View on Amazon

These come from our ranked list Best Internal SATA SSD, which compares them spec by spec.

FAQ

What is the difference between NVMe and SATA?

NVMe drives plug into an M.2 slot on the motherboard, while SATA drives use a SATA connector and a 2.5-inch bay. The PNY 500GB drive lists a read speed up to 550MB/s, while an NVMe drive uses the PCIe interface instead.

How do I know which M.2 key my slot takes?

Read the key in your motherboard manual and match the notch on the drive to the notch in the slot. An M key notch and a B key notch sit in different places, so a drive only fits a slot with the same key.

Can I use an NVMe drive in a SATA slot?

No. An NVMe drive plugs into an M.2 slot, and a 2.5-inch SATA drive fits a SATA bay. Check the connector your motherboard has in the maker's manual before you buy a drive.

Ranked internal ssds guides