How to Install an SSD in a Laptop
To install an SSD in a laptop, back up your files, shut the laptop down and unplug it, open the case as the maker's manual shows, fit the new drive in the matching slot, then install the operating system or copy your old drive onto the new drive. The exact slot and steps depend on the laptop model, so check the manual for your machine before you start.
Back up your files first
Copy your files to an external drive or a cloud account before you open the laptop, and confirm the copy opens on another device. A fresh drive starts empty, so anything left only on the old drive is gone after you swap it out. Keep the backup until the new drive boots and your files are in place, and keep your software keys and passwords where you can reach them.
Check which slot your laptop has
Laptops take a flat M.2 stick that slides into a slot on the board, or a 2.5-inch drive that sits in a bay and plugs into a SATA connector. Open the manual for your laptop model and look for the drive type, the length the slot accepts and whether the bay is fitted. Buy the shape that matches the slot, since an M.2 drive does not fit a 2.5-inch bay and a 2.5-inch drive does not fit an M.2 slot.
Shut down, unplug and open the case
Shut the laptop down, unplug the charger and remove any other cables, then follow the maker's manual to open the case. Work on a clear table, keep track of the screws as you remove them, and touch a metal part of the case before you handle the drive. Do not force the case open, and do not open a laptop that is still under warranty if the manual says to contact the maker instead.
Fit the drive and start the laptop
Slide the M.2 drive into its slot at a slight angle, press it flat and fasten the screw, or set the 2.5-inch drive in its bay and plug in the SATA connector. Close the case, replace the screws and plug the charger back in. Then install the operating system from your recovery media, or copy the old drive onto the new drive with cloning software before you swap the drives.
Check that the new drive works
When the laptop starts, open the storage settings and confirm the new drive shows with its full capacity. Run a short file copy to check that reads and writes work, and listen for nothing unusual. If the drive does not show, shut the laptop down, unplug it and reseat the drive, then check the manual again.
What you need

Lexar 1TB NM790 NVMe SSD w/Heatsink
A 1TB M.2 2280 PCIe Gen 4 SSD with a heatsink, up to 7400 MB/s read and a 5-year limited warranty.
View on Amazon
Samsung SSD 9100 PRO
A 2TB M.2 2280 PCIe 5.0 SSD with up to 14,700 MB/s read and a 5-year manufacturer warranty.
View on Amazon
TEAMGROUP T-Force Vulcan Z
A 1TB 2.5-inch SATA III SSD with up to 550 MB/s read, a 7mm slim design and a 3-year limited warranty.
View on Amazon
Crucial P310 1TB SSD
A 1TB M.2 2280 PCIe Gen 4 SSD with up to 7,100 MB/s read and a 5-year limited warranty.
View on AmazonThese come from our ranked list Best Internal SSD for Laptop, which compares them spec by spec.
FAQ
Do I need to back up before swapping the drive?
Yes. A new drive starts empty, so copy your files to an external drive or a cloud account first and confirm the copy opens. Keep the backup until the new drive boots and your files are in place.
How do I know which SSD shape fits my laptop?
Open the manual for your laptop model and look for the drive type and the length the slot accepts. A flat M.2 stick fits an M.2 slot, and a 2.5-inch drive fits a bay with a SATA connector, so buy the shape that matches.
What if the laptop does not see the new drive?
Shut the laptop down, unplug it and open the case again to reseat the drive and check the connector. If it still does not show, check the manual for the slot settings and contact the maker for help.



