What Is an NVMe SSD?
An NVMe SSD is a solid-state drive that connects through PCIe lanes instead of the SATA interface, so it moves data between the drive and the processor with less waiting. It stores files on flash memory with no moving parts, like other SSDs, but the NVMe protocol was built for flash from the start. The SATA drives below show the older interface for comparison.
What NVMe changes
SATA was designed for hard drives, while NVMe was designed for flash memory and handles many commands at once. The drive plugs into a slot on the motherboard and talks to the processor over PCIe lanes instead of a SATA cable. That shorter path is why an NVMe drive can answer many small reads and writes with less waiting.
How it differs from SATA
A SATA SSD connects through a SATA cable and port, and its interface sets the ceiling for how fast data moves. The drives in this guide are SATA drives: PNY CS900 models, a SanDisk SSD Plus and a Kingston A400, all in a 2.5-inch form factor. An NVMe drive skips the SATA cable and uses PCIe lanes, so the SATA interface no longer sets the pace.
Check the slot before you buy
Not every motherboard has a slot for an NVMe drive, so check the manual or spec sheet for your computer before you buy. Look for a slot that supports NVMe or PCIe storage, and note which generation it supports, since the slot and the drive each state a generation. Shut the computer down and unplug it first, and follow the maker's manual when you open the case.
What capacity means
Capacity is how much the drive holds, in gigabytes. The SATA drives here hold 250 GB, 500 GB or 960 GB: the PNY CS900 comes in 250 GB and 500 GB, the SanDisk SSD Plus holds 500 GB, and the Kingston A400 holds 960 GB. Count what you keep on the drive now, such as the operating system, apps and files, and pick a size with room to spare.
What you need

PNY CS900 500GB 2.5" SATA III Internal
A 500 GB SATA III drive in a 2.5-inch form factor with a rated read speed of up to 550 MB/s and a 3-year warranty.
View on Amazon
SanDisk SSD Plus
A 500 GB SATA III drive in a 2.5-inch, 7 mm form factor with a rated read speed of up to 545 MB/s and a 3-year limited warranty.
View on Amazon
PNY CS900 250GB 2.5" SATA III Internal
A 250 GB SATA III drive in a 2.5-inch form factor with a rated read speed of up to 535 MB/s and a 3-year warranty.
View on Amazon
Kingston 960GB A400 SATA3 2.5" Internal SSD
A 960 GB SATA3 drive in a 2.5-inch form factor with a limited 3-year warranty, for replacing a hard drive.
View on AmazonThese come from our ranked list Best Internal SATA SSD, which compares them spec by spec.
FAQ
Is an NVMe SSD the same as a SATA SSD?
No. Each stores files on flash memory, but an NVMe drive connects through PCIe lanes while a SATA drive connects through a SATA cable and port. The interface is the main difference.
Can I use an NVMe SSD in any computer?
No. The computer needs a slot that supports NVMe storage, so check the manual or spec sheet for your model first. A SATA drive fits a different slot and cable, so check which type your computer takes.
Do I need to replace my SATA drive?
Not to use the computer. A SATA SSD still holds the operating system, apps and files, and the drives here are SATA models. Replace it only when you want the NVMe interface or the drive reports errors.




