Amazon Black Friday Week deals

Paid link

Storage · How-to guide

How to Mount an SSD Drive

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

Mounting a 2.5-inch SATA SSD means fitting the drive in a 2.5-inch bay or caddy, then connecting a SATA data cable to the motherboard and a SATA power cable from the power supply. Shut the computer down and unplug it first, and follow the maker's manual for opening the case. After the drive is mounted, check that the computer sees it before you use it.

  1. Shut down and unplug first

    Shut the computer down fully, then unplug it from the wall before you open anything. The maker's manual shows how to open the case or the laptop panel and where the drive bay sits. Keep the screws and the side panel aside while you work, and do not force a panel that will not move.

  2. Find the 2.5-inch drive bay

    Look for the 2.5-inch bay in the case or the laptop, or for a caddy that holds a 2.5-inch drive. The maker's manual names the bay and shows how the drive sits in it, so follow those steps rather than guessing. If the bay has a caddy or a tray, take it out first and set the drive into it.

  3. Connect the SATA data and power cables

    A 2.5-inch SATA drive needs two cables: a SATA data cable to the motherboard and a SATA power cable from the power supply. The connectors fit one way, so line them up with the socket on the drive and push them in until they sit flat. Do not bend the cables sharply, and leave enough slack that the side panel closes without pressing on them.

  4. Secure the drive in the bay

    Set the drive in the bay or the caddy and fasten it with the screws or the tool-free mount the case provides. The drive should sit flat and still, with the cable ends clear of fans and the side panel. Put the panel back on and fasten it, then plug the computer back in.

  5. Check that the computer sees the drive

    Power the computer on and open the BIOS or the operating system's disk tool to see whether the new drive shows up. If the drive does not show up, shut the computer down, unplug it and check that both cables are seated fully. A drive that shows up is ready to be set up as storage.

What you need

PNY CS900 500GB 2.5" SATA III Internal

PNY CS900 500GB 2.5" SATA III Internal

A 500 GB 2.5-inch SATA III SSD with read speeds of up to 550 MB/s and a 3-year warranty.

View on Amazon
SanDisk SSD Plus

SanDisk SSD Plus

A 500 GB 2.5-inch 7mm SATA III SSD with read speeds of up to 545 MB/s and a 3-year limited warranty.

View on Amazon
PNY CS900 250GB 2.5" SATA III Internal

PNY CS900 250GB 2.5" SATA III Internal

A 250 GB 2.5-inch SATA III SSD with read speeds of up to 535 MB/s and a 3-year warranty.

View on Amazon
Kingston 960GB A400 SATA3 2.5" Internal SSD

Kingston 960GB A400 SATA3 2.5" Internal SSD

A 960 GB 2.5-inch SATA3 SSD with a limited 3-year warranty, made as a hard drive replacement.

View on Amazon

These come from our ranked list Best Internal SATA SSD, which compares them spec by spec.

FAQ

Do I need a SATA data cable for a 2.5-inch SSD?

Yes. A 2.5-inch SATA SSD connects with a SATA data cable to the motherboard and a SATA power cable from the power supply. Check the cables that came with your computer or motherboard before you buy new ones.

Will a 2.5-inch SSD fit in my laptop?

Many laptops take a 2.5-inch drive in a bay or a caddy, and the SanDisk drive here is 7mm thick. Check your laptop manual for the bay size and the thickness it accepts before you buy a drive.

What do I do after mounting the SSD?

Power on and check that the drive shows up in the BIOS or the operating system's disk tool. If it does not show up, shut the computer down, unplug it and check that both cables are seated.

Ranked internal ssds guides