Amazon Black Friday Week deals

Paid link

Storage · How-to guide

How to Install an SSD Without Removing the HDD

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

You can add an SSD and keep your HDD if your computer has a free 2.5 inch bay or SATA port, or an optical drive you can replace with a caddy. Connect the SSD as a second drive, initialize it, then move Windows and your programs to it while the HDD stays in place for files.

  1. Check for a free bay or slot

    Look in your computer manual for an empty 2.5 inch bay or a second SATA port. Desktops often have spare bays and SATA cables. Laptops with one bay need an optical drive you can replace with a caddy. If there is no free connection, you cannot add a second internal drive without removing the HDD.

  2. Back up before you open the case

    Copy important files to an external drive or cloud storage first. Shut the computer down, unplug it, and remove the battery if your manual allows it. Follow the maker manual for opening the case. If the computer is under warranty or you are unsure, contact the maker instead of opening it yourself.

  3. Mount and connect the SSD

    Fit the 2.5 inch SSD in the empty bay or caddy with the screws or rails the manual shows. Connect a SATA data cable to a free SATA port on the motherboard and a SATA power cable from the power supply. Leave the HDD cables connected.

  4. Initialize and set up the new drive

    Start the computer and open Disk Management in Windows or Disk Utility on a Mac. Initialize the new SSD and create a volume so it gets a drive letter. You can keep using the HDD as is, clone Windows to the SSD with cloning software, or install Windows fresh on the SSD and keep the HDD for storage.

  5. Set the SSD as the boot drive

    After cloning or installing Windows on the SSD, restart and enter the BIOS or UEFI setup using the key your manual lists. Set the SSD as the boot drive and save. Keep the HDD connected. Once Windows starts from the SSD, you can keep the old Windows files on the HDD or delete them after you confirm everything works.

What you need

PNY CS900 500GB 2.5" SATA III Internal

PNY CS900 500GB 2.5" SATA III Internal

PNY CS900 500 GB 2.5 inch SATA III SSD for adding as a second internal drive.

View on Amazon
SanDisk SSD Plus

SanDisk SSD Plus

SanDisk SSD Plus 500 GB 2.5 inch SATA III SSD for a free bay or caddy.

View on Amazon
PNY CS900 250GB 2.5" SATA III Internal

PNY CS900 250GB 2.5" SATA III Internal

PNY CS900 250 GB 2.5 inch SATA III SSD with read speeds up to 535 MB/s.

View on Amazon
Kingston 960GB A400 SATA3 2.5" Internal SSD

Kingston 960GB A400 SATA3 2.5" Internal SSD

Kingston A400 960 GB 2.5 inch SATA SSD with room for system and files.

View on Amazon

These come from our ranked list Best Internal SATA SSD, which compares them spec by spec.

FAQ

Can I keep Windows on the HDD and just add the SSD?

Yes. You can use the SSD as extra storage and keep booting from the HDD. To get faster start times, clone or install Windows on the SSD and set it as the boot drive.

What if my laptop has only one drive bay?

Check the manual for a free 2.5 inch bay or a second SATA port. If there is none and no optical drive to replace with a caddy, you must replace the HDD or use an external SSD instead.

Do I need to remove the HDD to clone it?

No. With both drives connected inside the computer, cloning software can copy the HDD to the SSD. Follow the software steps and keep the HDD connected until the clone finishes.

Ranked internal ssds guides