How to Install a SATA SSD on a Motherboard
To install a SATA SSD on a motherboard, mount the 2.5-inch drive in a drive bay, connect a SATA data cable from the drive to a SATA port on the motherboard, and connect a SATA power cable from the power supply. Shut the computer down and unplug it before you open the case, and follow the maker's manual for your model.
Shut down and unplug first
Shut the computer down through the operating system, then unplug the power cable from the wall and the computer. Do not open a computer that is still plugged in. Follow the maker's manual for your model to open the case, and do not open a device that is under warranty; contact the maker instead.
Find a SATA port and a drive bay
Look on the motherboard for the SATA ports and find a free one. Find a 2.5-inch drive bay or mounting spot in the case for the SSD. Check the maker's manual for the mounting spot for a 2.5-inch drive in your model.
Connect the SATA data cable
Plug one end of a SATA data cable into the SATA port on the motherboard and the other end into the data connector on the SSD. The connectors fit one way, so line up the L-shaped key before you push the cable in. Do not force a cable that does not fit.
Connect power and mount the drive
Plug a SATA power cable from the power supply into the power connector on the SSD. Then set the drive in the 2.5-inch bay and fasten it with the screws the case provides for that bay. A drive that is not fastened can shift and pull its cables loose.
Check the drive is detected
Close the case, plug the power cable back in and switch the computer on. Open the system setup screen or the disk tool in your operating system and check that the new drive is listed. If the drive does not show up, shut down, unplug the computer and check both SATA cables again.
What you need

PNY CS900 500GB 2.5" SATA III Internal
A 500GB 2.5-inch SATA III drive rated up to 550MB/s read and 500MB/s write, with a 3 year warranty.
View on Amazon
SanDisk SSD Plus
A 500GB 2.5-inch SATA III 6 Gb/s drive rated up to 545MB/s read, with a 3 year limited warranty.
View on Amazon
PNY CS900 250GB 2.5" SATA III Internal
A 250GB 2.5-inch SATA III drive rated up to 535MB/s read and 500MB/s write, with a 3 year warranty.
View on Amazon
Kingston 960GB A400 SATA3 2.5" Internal SSD
A 960GB 2.5-inch SATA3 drive for a hard drive replacement, with a limited 3 year warranty.
View on AmazonThese come from our ranked list Best Internal SATA SSD, which compares them spec by spec.
FAQ
Do I need a SATA cable for the SSD?
Yes. The drive connects to the motherboard with a SATA data cable and to the power supply with a SATA power cable. Check what cables your case and motherboard include before you start.
Will a SATA SSD fit any motherboard?
Any motherboard with a free SATA port and a SATA power cable from the power supply can take a 2.5-inch SATA drive. Check your motherboard manual for the SATA port locations and for a free 2.5-inch bay in your case.
Why is my new SSD not showing up?
First check both SATA cables are pushed in fully at the drive and at the motherboard. Then check the system setup screen or disk tool to see if the drive is listed, and format the drive before use if it is new and blank.




