How to Install a New SSD in a PC
To install a new SSD in a PC, shut the PC down, unplug it, open the case, mount the 2.5-inch SATA drive in a drive bay, connect the SATA data and power cables, close the case and start the PC. The four drives here are all 2.5-inch SATA III drives, so they fit the same bay and cables. Format the new drive before you use it.
Shut down and unplug the PC
Shut the PC down from the operating system, then unplug the power cable from the wall and the back of the PC. Press the power button once after unplugging to drain any leftover charge from the power supply. Work on a clear desk with the case on its side, and keep the screws from the side panel in a small dish so they do not roll away. Follow the maker's manual for opening the case on your model.
Mount the drive in a bay
Find a free 2.5-inch drive bay in the case and slide the SSD into it, then fasten it in place. The PNY CS900 500GB, the SANDISK SSD Plus 500GB, the PNY CS900 250GB and the Kingston A400 960GB are all 2.5-inch drives, so each one mounts the same way. Check the maker's manual for where the bay sits and how the drive fastens in your case.
Connect the SATA cables
Connect a SATA data cable from the drive to a SATA port on the motherboard, and connect a SATA power cable from the power supply to the drive. The SATA data cable and the power cable each fit only one way, so line up the L-shaped connector before you push it in. Check that both cables sit fully in their sockets before you close the case.
Start the PC and format the drive
Close the case, plug the power cable back in and start the PC. Open the disk management tool in your operating system and check that the new drive shows up. Format the new drive before you use it for files, and pick the file system your operating system suggests. The Kingston A400 960GB gives you 960GB of space for files, while the PNY CS900 500GB and the SANDISK SSD Plus 500GB each give you 500GB.
What you need

PNY CS900 500GB 2.5" SATA III Internal
A 500GB 2.5-inch SATA III SSD with read speeds up to 550MB/s and write speeds up to 500MB/s, backed by a 3-year warranty.
View on Amazon
SanDisk SSD Plus
A 500GB 2.5-inch SATA III 6 Gb/s SSD with read speeds up to 545MB/s and write speeds up to 505MB/s, backed by a 3-year limited warranty.
View on Amazon
PNY CS900 250GB 2.5" SATA III Internal
A 250GB 2.5-inch SATA III SSD with read speeds up to 535MB/s and write speeds up to 500MB/s, backed by a 3-year warranty.
View on Amazon
Kingston 960GB A400 SATA3 2.5" Internal SSD
A 960GB 2.5-inch SATA3 SSD for fast start-up, loading and file transfers, backed by a limited 3-year warranty.
View on AmazonThese come from our ranked list Best Internal SATA SSD, which compares them spec by spec.
FAQ
Do I need a SATA cable for a new SSD?
Yes. A 2.5-inch SATA III drive connects with a SATA data cable to the motherboard and a SATA power cable from the power supply. Check the maker's manual for where each cable goes in your case.
Will a SATA III SSD work in an older PC?
Yes. The PNY CS900 drives are backwards compatible with SATA II, so they work in a PC with SATA II ports. Check the maker's manual for the SATA ports your PC has.
How do I know the new SSD is working?
Start the PC and open the disk management tool in your operating system. The new drive should show up there, ready to format before you use it for files.
Can I open the case while the PC is under warranty?
Check the warranty terms or contact the maker before you open the case. The PNY, SANDISK and Kingston drives here each carry a 3-year warranty, but opening the PC can affect the PC's own warranty.




