Amazon Black Friday Week deals

Paid link

Storage · How-to guide

How to Install an mSATA SSD in a Laptop

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

An mSATA SSD fits into an mSATA slot inside the laptop, and only an mSATA drive fits that slot. Shut the laptop down, unplug it, open it by the maker's manual, slide the drive into the slot, fasten it and close the laptop. Then check the drive in your operating system's disk tool before you use it.

  1. Check for an mSATA slot first

    mSATA is a small card connector, and it is not the same as M.2. An M.2 2280 NVMe drive does not fit an mSATA slot, and a 2.5-inch SATA drive fits a drive bay, not an mSATA slot. Look in your laptop manual or spec sheet for an mSATA slot before you buy. Buy the drive that matches the slot the laptop actually has.

  2. Shut down and open the laptop

    Shut the laptop down and unplug it before you open anything, and follow the maker's manual for your model. Do not open a laptop that is still under warranty; contact the maker first. Keep the screws you remove in one place, and note where each one came from so the base goes back the same way.

  3. Fit the mSATA drive

    Find the mSATA slot on the board and line the drive up with it. Slide the drive into the slot at a slight angle, press it down flat, and fasten it with the screw that came with the slot or the drive. Do not force the drive; if it does not sit flat, lift it out and line it up again. Close the laptop and put the screws back.

  4. Check the drive shows up

    Start the laptop and open your operating system's disk tool. Look for the new drive in the list of disks. A new drive may need to be initialized and formatted before it shows up as storage, so follow the prompts in the disk tool. If the drive does not appear, shut the laptop down, unplug it, open it again and check the drive sits flat in the slot.

  5. Move your data or install fresh

    Once the drive shows up, decide what goes on it. You can clone the old drive onto the new one with cloning software, or install the operating system fresh and copy your files over. Check the requirements published for your operating system and your software before you start, and keep a copy of your files somewhere else until the new drive works.

What you need

Lexar 1TB NM790 NVMe SSD w/Heatsink

Lexar 1TB NM790 NVMe SSD w/Heatsink

A 1TB M.2 2280 NVMe drive with a heatsink, rated to 7,400 MB/s read, for laptops with an M.2 2280 PCIe Gen 4 slot.

View on Amazon
Samsung SSD 9100 PRO

Samsung SSD 9100 PRO

A 2TB M.2 2280 PCIe 5.0 NVMe drive rated to 14,700 MB/s read, for laptops with an M.2 2280 PCIe 5.0 slot.

View on Amazon
TEAMGROUP T-Force Vulcan Z

TEAMGROUP T-Force Vulcan Z

A 1TB 2.5-inch SATA III drive rated to 550 MB/s read, for laptops with a 2.5-inch SATA drive bay.

View on Amazon
Crucial P310 1TB SSD

Crucial P310 1TB SSD

A 1TB M.2 2280 PCIe Gen 4 NVMe drive rated to 7,100 MB/s read, for laptops with an M.2 2280 slot.

View on Amazon

These come from our ranked list Best Internal SSD for Laptop, which compares them spec by spec.

FAQ

Can I put an M.2 SSD in an mSATA slot?

No. mSATA and M.2 are different connectors, so an M.2 2280 drive does not fit an mSATA slot. Check your laptop manual for the slot type and buy the drive that matches it.

Does a 2.5-inch SATA drive fit an mSATA slot?

No. A 2.5-inch SATA III drive fits a 2.5-inch drive bay, not an mSATA slot. An mSATA slot takes an mSATA card, which is much smaller than a 2.5-inch drive.

Will the laptop see the new drive right away?

Not always. Open your operating system's disk tool and check the drive is listed. A new drive may need to be initialized and formatted before it shows up as storage.

Ranked internal ssds guides