Amazon Black Friday Week deals

Paid link

PC Components · How-to guide

How to Install a Liquid Cooling System in a PC

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

Installing a liquid cooling system in a PC means mounting an all-in-one cooler: a radiator with fans, a pump head that sits on the CPU, and hoses that link them. Shut the PC down, unplug it, and follow the maker's manual for your cooler. Check that the cooler fits your CPU socket and that the radiator fits your case before you start.

  1. Check the socket and radiator fit

    Look at the sockets the cooler supports and match them to your CPU socket, such as LGA1700, LGA1851, AM4 or AM5. The ARCTIC Liquid Freezer III Pro 360 supports LGA1851, LGA1700, AM4 and AM5, while the Thermalright Aqua Elite 120 V3 supports LGA1150, LGA1200, LGA1700, LGA1851, AM4 and AM5. Measure the space in your case against the radiator size, and check that the case has mounting points for the radiator and its fans.

  2. Shut down and open the case

    Shut the PC down and unplug it from the wall before you touch anything inside. Follow the maker's manual for opening your case and for removing the old cooler, and keep the screws and brackets you remove in one place. Touch a bare metal part of the case first to discharge static, and work on a clear, dry surface.

  3. Mount the radiator and fans

    Fix the radiator to the case mounting points with the mounting hardware that comes with the cooler, with the fans attached as the manual shows. The ARCTIC Liquid Freezer III Pro 360 uses three 120 mm fans, while the Thermalright Aqua Elite 240 V3 uses two 120 mm fans. Route the hoses so they do not press on the motherboard or the graphics card, and leave slack for the pump head to reach the CPU.

  4. Mount the pump head on the CPU

    Fit the mounting bracket for your socket, then set the pump head on the CPU and tighten the screws in the order the manual gives. The ARCTIC coolers use a contact frame for LGA1851 and LGA1700 and native offset mounting for Intel and AMD. Do not force the bracket, and check that the pump head sits flat before you move on.

  5. Connect the cables and check

    Plug the pump and fan cables into the headers the manual shows, and connect the ARGB cable to a 5V 3-pin header if your board has one. The Thermalright Aqua Elite coolers use 4-pin PWM fan connectors and 5V 3-pin ARGB connectors. Power the PC on, check that the fans spin and the pump runs, and watch the CPU temperature in your system monitor before you close the case.

What you need

ARCTIC Liquid Freezer III Pro 360 A-RGB

ARCTIC Liquid Freezer III Pro 360 A-RGB

An AIO cooler with A-RGB lighting for LGA1851, LGA1700, AM4 and AM5, with three 120 mm fans and a 6-year warranty.

View on Amazon
ARCTIC Liquid Freezer III Pro 360

ARCTIC Liquid Freezer III Pro 360

An AIO cooler for LGA1851, LGA1700, AM4 and AM5 with three 120 mm fans, offset mounting and a 6-year warranty.

View on Amazon
Thermalright Aqua Elite 120 V3 AIO CPU Cooler

Thermalright Aqua Elite 120 V3 AIO CPU Cooler

The Thermalright Aqua Elite 120 V3 is a 120 mm AIO cooler with two ARGB PWM fans and a fourth-generation pump head.

View on Amazon
Thermalright Aqua Elite 240 V3 Water Cooling CPU Cooler

Thermalright Aqua Elite 240 V3 Water Cooling CPU Cooler

The Thermalright Aqua Elite 240 V3 is a 240 mm AIO cooler with two ARGB PWM fans and a fourth-generation pump head.

View on Amazon

These come from our ranked list Best CPU Liquid Cooler, which compares them spec by spec.

FAQ

How do I know if a liquid cooler fits my CPU?

Check the sockets the cooler supports against your CPU socket. The coolers here support LGA1851, LGA1700, AM4 and AM5, and the Thermalright models also support LGA1150 and LGA1200. If your socket is not among them, that cooler does not fit.

Do I need to remove my old cooler first?

Yes. Shut the PC down, unplug it, and remove the old cooler and its bracket before you fit the new mounting hardware. Follow the maker's manual for your cooler and your motherboard.

Where do the radiator fans plug in?

Plug the radiator fan cables into the fan headers on your motherboard, and the pump cable into the header the cooler manual shows. The Thermalright fans use 4-pin PWM connectors, and the ARGB cable uses a 5V 3-pin header.

Ranked cpu coolers guides