Amazon Black Friday Week deals

Paid link

PC Components · How-to guide

How to Install a Water Cooler in a PC

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

Installing a water cooler in a PC means fitting a pump and cold plate on the CPU and mounting a radiator with fans in the case. Shut the PC down, unplug it, and follow the manuals for your case, motherboard and cooler before you open it. Check that the cooler fits your socket and that the case has room for the radiator before you start.

  1. Check the socket and radiator space

    Look in your motherboard manual for the socket type and in your case manual for the radiator sizes and mounting spots the case takes. Compare both with the cooler manual before you buy or fit anything, since a radiator that is too large for the case or a bracket that does not match the socket will not fit. Check also that the case has a free fan header or pump header and room for the tubes to reach the CPU without pressing on other parts.

  2. Shut down and unplug the PC

    Shut the PC down, then unplug the power cable from the wall and from the back of the PC. Follow the manual for your case to remove the side panel, and touch a bare metal part of the case before you handle parts inside. Work on a clear surface with room to set the panel and the cooler down, and keep the cooler upright so the tubes stay clear of the motherboard and the fans.

  3. Fit the mounting bracket and cold plate

    Fit the mounting bracket for your socket to the motherboard as the cooler manual shows, using the backplate and screws that come with the cooler. Spread the thermal paste as the cooler manual shows, or use the paste already on the cold plate if the manual says it is there. Set the pump and cold plate onto the CPU, line up the screws with the bracket, and tighten them a little at a time in turn so the plate sits flat on the CPU.

  4. Mount the radiator and fans

    Fit the radiator to the mounting spot in the case that the case manual shows, with the fans set to push air through the radiator and out of the case or into it as the cooler manual shows. Fasten the radiator with the screws the case provides, and check that it sits flat and does not move when you touch it. Keep the tubes clear of the fans and other moving parts, and leave slack in the tubes so they are not pulled tight.

  5. Connect the cables and check the cooler

    Connect the pump cable and the fan cables to the headers the motherboard manual shows, then close the case and plug the power cable back in. Switch the PC on and listen for the pump and fans, then check that the system reads the CPU temperature and the fans spin. If you see liquid, hear a loud rattle, or the fans do not spin, shut the PC down, unplug it, and check the cables and the fittings against the cooler manual.

What you need

ARCTIC Liquid Freezer III Pro 360 A-RGB

ARCTIC Liquid Freezer III Pro 360 A-RGB

An AIO cooler with a 360 radiator, A-RGB fans and a contact frame for Intel LGA1851 and LGA1700, with a 6 years warranty.

View on Amazon
Thermalright Peerless Assassin 120 SE CPU Cooler

Thermalright Peerless Assassin 120 SE CPU Cooler

An air cooler, not a water cooler, with 6 heat pipes and 120mm PWM fans, listed for AMD AM4 and AM5 and Intel LGA 1700, 1150, 1151, 1200 and 1851.

View on Amazon
ARCTIC Liquid Freezer III Pro 360

ARCTIC Liquid Freezer III Pro 360

An AIO cooler with a 360 radiator and 3 fans, listed for LGA1851, LGA1700, AM4 and AM5, with a 6 years warranty.

View on Amazon
LIAN LI HydroShift II Curved 360 TL Flex AIO Cooler-Black-HS2OLDC36TB

LIAN LI HydroShift II Curved 360 TL Flex AIO Cooler-Black-HS2OLDC36TB

An AIO cooler with a 360mm radiator, 3 fans and a 6.67-inch 2K 60Hz OLED display, listed for Intel LGA 1851 and 1700 and AMD AM5 and AM4.

View on Amazon

These come from our ranked list Best Cooler for PC, which compares them spec by spec.

FAQ

Do I need to remove the old cooler first?

Yes. Take the old cooler off the CPU and clean the old paste from the CPU before you fit the new cooler. Follow the manual for your motherboard and cooler for the bracket and screws to use.

Can a water cooler fit in any PC case?

No. The case needs room for the radiator and fans, and the motherboard needs the right socket for the cooler bracket. Check the manuals for your case, motherboard and cooler before you buy.

Does a water cooler need refilling?

The AIO water coolers are sealed and do not need refilling by the reader. If you see liquid outside the tubes or the cooler stops working, shut the PC down, unplug it, and contact the maker.

Ranked cpu coolers guides