Amazon Black Friday Week deals

Paid link

PC Components · How-to guide

How to Install a Liquid Cooler in a PC

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

To install a liquid cooler in a PC, shut the PC down, unplug it, mount the radiator and fans in the case, fit the pump head on the CPU with the bracket for your socket, then connect the cables and check for leaks before you power it on. The four coolers here fit AMD AM4 and AM5 and Intel LGA1700 and LGA1851 sockets.

  1. Shut down and unplug the PC

    Shut the PC down through the operating system, then switch off the power supply and unplug the power cable from the wall. Press the power button once more to drain any charge left in the system. Work on a clear table with the case on its side and the side panel off, and follow the steps in the maker's manual for your cooler and your case.

  2. Check the socket and the radiator space

    Check your CPU socket against the cooler box before you open anything. The four coolers here fit AMD AM4 and AM5 and Intel LGA1700 and LGA1851, and the Thermalright coolers also list older Intel sockets. Pick the mounting parts for your socket from the accessories in the box. Then check the case: a 360 cooler needs room for a 360 radiator, a 240 needs room for a 240 radiator, and a 120 fits a single 120 fan mount.

  3. Fit the bracket and the pump head

    Fit the mounting bracket for your socket on the board, then set the pump head on the CPU as the maker's manual shows. The ARCTIC coolers shift the cold plate center toward the CPU hotspot, so follow the offset marks on the bracket if your cooler has them. Tighten the screws in a cross pattern a little at a time until the pump head sits flat and firm, and do not overtighten.

  4. Mount the radiator and fans

    Mount the radiator to the case fan mounts with the screws from the box, then fit the fans on the radiator. Route the hoses so they do not press against the graphics card or the case edge, and leave a gentle curve in the hoses. The ARCTIC coolers hide the fan cables in the hose sheathing, so only a single cable runs to the motherboard.

  5. Connect the cables and power on

    Connect the pump cable and the fan cables to the motherboard headers the manual names, and connect the ARGB cable if your cooler has one. Put the side panel back on, plug the power cable in and switch the PC on. Listen for the pump and fans, watch for leaks around the fittings, and check the CPU temperature in the BIOS or your monitoring app. If anything leaks, shut the PC down, unplug it and contact the maker.

What you need

ARCTIC Liquid Freezer III Pro 360 A-RGB

ARCTIC Liquid Freezer III Pro 360 A-RGB

An AIO cooler for LGA1851, LGA1700, AM4 and AM5 with A-RGB fans, an integrated VRM fan and a 6-year warranty.

View on Amazon
ARCTIC Liquid Freezer III Pro 360

ARCTIC Liquid Freezer III Pro 360

An AIO cooler with 3 x 120 mm fans for LGA1851, LGA1700, AM4 and AM5, with a 6-year warranty.

View on Amazon
Thermalright Aqua Elite 120 V3 AIO CPU Cooler

Thermalright Aqua Elite 120 V3 AIO CPU Cooler

A Thermalright Aqua Elite 120 V3 AIO cooler with 2 fans included and ARGB lighting, for AMD and Intel sockets.

View on Amazon
Thermalright Aqua Elite 240 V3 Water Cooling CPU Cooler

Thermalright Aqua Elite 240 V3 Water Cooling CPU Cooler

A Thermalright Aqua Elite 240 V3 AIO cooler with 2 fans included and ARGB lighting, for AMD and Intel sockets.

View on Amazon

These come from our ranked list Best CPU Liquid Cooler, which compares them spec by spec.

FAQ

Do I need to remove the old cooler first?

Yes. Shut the PC down, unplug it, remove the old cooler and its bracket, and clean the CPU surface before you fit the new cooler.

Which socket does my CPU use?

Check your CPU model and board manual, then match it to the socket list on the cooler box. The four coolers here fit AMD AM4 and AM5 and Intel LGA1700 and LGA1851.

Can I install a liquid cooler without removing the motherboard?

Yes, if the case gives you room to reach the back of the board for the bracket. If you cannot reach it, take the board out first and follow the steps in the maker's manual.

Ranked cpu coolers guides