How to Install Both an SSD and HDD in a Laptop
Yes, if your laptop has room for two drives, such as an M.2 slot and a 2.5-inch bay. Install the SSD for the operating system and apps, and install the HDD for files. Check your laptop manual first to confirm the slots, form factors, and interfaces your model has.
Check what your laptop fits
Open the manual for your exact laptop model and look for the drive slots and bays it has. Some laptops have an M.2 slot and a 2.5-inch bay, which is the pair this install needs. Others have one slot only, or a second slot of a different size. Note the form factor for each slot, such as M.2 2280 or 2.5-inch, and the interface, such as PCIe or SATA III, before you buy anything.
Shut down and unplug the laptop
Shut the laptop down fully and unplug it from power before you open it. Follow the maker's manual for opening your model, including which screws to remove and where the cover clips sit. If the laptop is under warranty, check the maker's guidance or contact the maker before opening it. Do not open a power supply or a battery pack.
Fit the SSD in its slot
Fit the SSD into the slot the manual shows for it. An M.2 2280 SSD slides into the M.2 slot at a slight angle and is held down with the screw the manual shows. A 2.5-inch SATA III SSD slides into the 2.5-inch bay and connects to the SATA connector there. Seat the drive fully, secure it as the manual shows, and do not force it if it does not sit flat.
Fit the HDD in its bay
Fit the HDD into the remaining 2.5-inch bay. Slide it into the bay so the SATA connector lines up, then secure it with the bracket or screws the manual shows. Check that the drive sits flat and does not move when you tilt the laptop gently. If the bay uses a caddy or adapter, fit the HDD into that part first, then fit the part into the bay.
Set up the drives and check them
Close the cover, refit the screws the manual shows, and plug the laptop back in. Start the laptop and check that both drives appear in the operating system. If the new drive does not appear for files, open the disk tools in your operating system and prepare it there. Then install the operating system on the SSD and keep your files on the HDD.
What you need

Lexar 1TB NM790 NVMe SSD w/Heatsink
A 1TB M.2 2280 NVMe SSD with a heatsink and a rated read speed of 7400 MB/s, for the M.2 slot in this install.
View on Amazon
Samsung SSD 9100 PRO
A 2TB M.2 2280 PCIe 5.0 NVMe SSD with read speeds up to 14,700 MB/s, for the M.2 slot in this install.
View on Amazon
TEAMGROUP T-Force Vulcan Z
A 1TB 2.5-inch SATA III SSD with read speeds up to 550 MB/s and a 7mm slim design, for laptops that fit a 2.5-inch drive.
View on Amazon
Crucial P310 1TB SSD
A 1TB M.2 2280 PCIe Gen4 NVMe SSD with read speeds up to 7,100 MB/s, including Acronis Data Recovery Software.
View on AmazonThese come from our ranked list Best Internal SSD for Laptop, which compares them spec by spec.
FAQ
Can every laptop take both an SSD and an HDD?
No. A laptop needs a spare slot or bay for the second drive, such as an M.2 slot plus a 2.5-inch bay. Check the manual for your exact model before buying a drive.
Which drive should hold the operating system?
Put the operating system and apps on the SSD, and keep large files on the HDD. That way the SSD holds the system and the HDD holds the files you store.
Do I need to format the new drive?
Yes. A new drive does not show up for files until it is set up in the operating system. Use the disk tools in your operating system to prepare it, and follow the instructions they show.



