How to Install Another SSD in a PC
Adding a second SSD gives a PC more storage without removing the drive already in it. In a desktop, a 2.5-inch SATA drive mounts in a drive bay or on a tray and connects with a SATA data cable to the motherboard and a SATA power cable from the power supply. Shut the PC down, unplug it, and follow the manual for your case before you open it.
Check for a free SATA port and bay
Look at your motherboard for a spare SATA port and look at your case for a free 2.5-inch bay or mounting point. The manual for your motherboard shows where the SATA ports sit, and the manual for your case shows the bays and how to reach them. If no bay is free, check the manual for a mounting bracket that fits the case before you start.
Shut down and unplug the PC
Shut the PC down, then unplug the power cable from the wall and from the back of the PC. Follow the manual for your case to remove the side panel, and touch a bare metal part of the case before you handle parts inside. Work on a clear surface with room to set the panel and the drive down.
Mount the drive in the bay
Fit the 2.5-inch drive into the free bay or onto the mounting tray, with the SATA connectors facing the side where the cables can reach them. Fasten the drive with the screws or clips the case provides, and check that it sits flat and does not move when you touch it. Leave the cables clear of fans inside the case.
Connect the SATA data and power cables
Connect a SATA data cable from the drive to a free SATA port on the motherboard, then connect a SATA power cable from the power supply to the drive. Push each connector in until it sits flat and the latch on the cable, if it has one, holds it in place. Check that neither cable pulls tight or rests against a fan.
Format the new drive
Close the case, plug the power cable back in, and switch the PC on. Open Disk Management and look for the new drive, then create a volume and format it so the system can store files on it. The drive appears with the other drives once the format finishes, and you can move files to it from there.
What you need

PNY CS900 500GB 2.5" SATA III Internal
A 500GB 2.5-inch SATA III drive with read speeds up to 550MB/s and a 3 Year warranty.
View on Amazon
SanDisk SSD Plus
A 500GB 2.5-inch SATA III 6 Gb/s drive, 7mm thick, with read speeds up to 545MB/s and a 3 Year Limited warranty.
View on Amazon
PNY CS900 250GB 2.5" SATA III Internal
A 250GB 2.5-inch SATA III drive with read speeds up to 535MB/s and a 3 Year warranty.
View on Amazon
Kingston 960GB A400 SATA3 2.5" Internal SSD
A 960GB 2.5-inch SATA3 drive with a Limited 3 Year warranty for replacing a hard drive.
View on AmazonThese come from our ranked list Best Internal SATA SSD, which compares them spec by spec.
FAQ
Can I add a second SSD without removing the first drive?
Yes, if the motherboard has a free SATA port and the case has a free bay for a 2.5-inch drive. The new drive works alongside the drive already in the PC, and you choose where to store files after you format it.
Does a SATA SSD work in any desktop?
It works in a desktop with a free SATA port on the motherboard and a SATA power connector from the power supply. Check the manual for your motherboard and case to confirm both are free before you buy the drive.
Do I need to reinstall Windows on the new SSD?
No. Windows stays on the drive it is already on, and the new SSD works as extra storage for files and apps. You can move files to it after you format it, and the PC still boots from the old drive.




